Re: [hatari-devel] MEMWATCH freezes Hatari

[ Thread Index | Date Index | More Archives ]


Yes, I build it myself with gcc 7.3.0 under Linux. Looks as if in
particular the PMMU and cycle exact settings are causing problems and
side effects.

Best regards

> Uwe Seimet schrieb:
> > Regarding ROMSPEED: When I boot with an empty AUTO folder from a GEMDOS HD
> > folder and then start ROMSPEED from the desktop (from a GEMDOS drive) a
> > double bus fault is reported. PMMU is on, prefetch and cycle exact are off.
> Sorry, I can't reproduce this, either. I'm using today's Hatari snapshot
> (r7173, kindly provided by
>, PMMU on, prefetch and
> cycle exact off, as you reported. ROMSPEED started from Desktop runs
> just fine, telling me "ROMSPEED ... installiert". No crash, even if I
> run some application afterwards.
> So, either there is something special about your config or there is
> something special about your Hatari build. (I assume you build it
> yourself under Linux?)
> Regards
> Christian
> -- 
> Christian Zietz  -  CHZ-Soft  -  czietz@xxxxxxx
> WWW:
> PGP/GnuPG-Key-ID: 0x52CB97F66DA025CA / 0x6DA025CA

Mail converted by MHonArc 2.6.19+