Re: [hatari-devel] One St demo that crash

[ Thread Index | Date Index | More Archives ]

So it seems that switching from Falcon mode to ST (or STE) mode by changing the TOS version in the GUI doesn't change all the parameters and --fast boot on is needed at least for this st demo.


Le 06/07/2015 22:50, Eero Tamminen a écrit :

I can confirm that "--fast-boot off" is the trigger for crash.

Both TymeWarp and WarpTyme demos crash with it.

Other YM Rockerz demos work fine with it.

	- Eero

On maanantai 06 heinäkuu 2015, Laurent Sallafranque wrote:
OK, I've managed to have it once, but I understand why it gives me some
problems !

I always start hatari (winuae core) in falcon mode, blitter ON, DSP ON,
FPU ON, ...

When I select tos 1.04fr, hatari tells me it's going to switch to 68000

But if I have a look at the gui after the reset, I can see that :

- blitter is still activated (at least in the gui)
- DSP is still activated

If I launch the demo it still crash.

I remove the DSP, and cold reset, it still crash.
Then I remove the Blitter in the gui, it still crash
Then, I add "patch timer D", it still crash
Then I remove "boot faster by patching tos and sysvars : the demo works.


Le 06/07/2015 22:16, Nicolas Pomarède a écrit :
Le 06/07/2015 21:17, Laurent Sallafranque a écrit :

I wanted to listen some soundship music, so I downloaded the following

It seems to crash (double bus/address error => Cpu halted) after the
intro (when I press space or when I wait to the end of the intro).

I've tested with hatari oldcpu 1.8 (ST and STE mode) , 1 Mo and 4 Mo

I've also tested with the latest release (same problem).

In case you didn't notice it before.

seems to work for me, I tested with winuae cpu :
  - prefetch
  - cycle exacy

it works with tos 1.04fr, 2 MB, STF mode ; and it works too with tos
1.62fr, STE mode, 2 MB.

Demo is running from gemdos HD.


Mail converted by MHonArc 2.6.19+