Re: [hatari-devel] One St demo that crash

[Eero Tamminen <oak@xxxxxxxxxxxxxx>]

Hi,

I can confirm that "--fast-boot off" is the trigger for crash.

Both TymeWarp and WarpTyme demos crash with it.

Other YM Rockerz demos work fine with it.


	- Eero

On maanantai 06 heinäkuu 2015, Laurent Sallafranque wrote:
> OK, I've managed to have it once, but I understand why it gives me some
> problems !
> 
> I always start hatari (winuae core) in falcon mode, blitter ON, DSP ON,
> FPU ON, ...
> 
> When I select tos 1.04fr, hatari tells me it's going to switch to 68000
> ...
> 
> But if I have a look at the gui after the reset, I can see that :
> 
> - blitter is still activated (at least in the gui)
> - DSP is still activated
> 
> If I launch the demo it still crash.
> 
> I remove the DSP, and cold reset, it still crash.
> Then I remove the Blitter in the gui, it still crash
> Then, I add "patch timer D", it still crash
> Then I remove "boot faster by patching tos and sysvars : the demo works.
> 
> Laurent
> 
> Le 06/07/2015 22:16, Nicolas Pomarède a écrit :
> > Le 06/07/2015 21:17, Laurent Sallafranque a écrit :
> >> Hi,
> >> 
> >> I wanted to listen some soundship music, so I downloaded the following
> >> : http://www.pouet.net/prod.php?which=25855
> >> 
> >> It seems to crash (double bus/address error => Cpu halted) after the
> >> intro (when I press space or when I wait to the end of the intro).
> >> 
> >> I've tested with hatari oldcpu 1.8 (ST and STE mode) , 1 Mo and 4 Mo
> >> 
> >> I've also tested with the latest release (same problem).
> >> 
> >> 
> >> In case you didn't notice it before.
> > 
> > Hi
> > 
> > seems to work for me, I tested with winuae cpu :
> >  - prefetch
> >  - cycle exacy
> > 
> > it works with tos 1.04fr, 2 MB, STF mode ; and it works too with tos
> > 1.62fr, STE mode, 2 MB.
> > 
> > Demo is running from gemdos HD.
> > 
> > Nicolas