Re: [hatari-devel] One St demo that crash

[Eero Tamminen <oak@xxxxxxxxxxxxxx>]

Hi,

On tiistai 07 heinäkuu 2015, Laurent Sallafranque wrote:
> So it seems that switching from Falcon mode to ST (or STE) mode by
> changing the TOS version in the GUI doesn't change all the parameters
> and  --fast boot on is needed at least for this st demo.
> 
> Le 06/07/2015 22:50, Eero Tamminen a écrit :
> > I can confirm that "--fast-boot on" is the trigger for crash.
> > 
> > Both TymeWarp and WarpTyme demos crash with it.

Sorry, I forgot that due to bug in TymeWarp, it needs STE.

I.e. only WarpTyme crashes with "--fast-boot on".


	- Eero

> > 
> > Other YM Rockerz demos work fine with it.
> > 
> > 	- Eero
> > 
> > On maanantai 06 heinäkuu 2015, Laurent Sallafranque wrote:
> >> OK, I've managed to have it once, but I understand why it gives me
> >> some problems !
> >> 
> >> I always start hatari (winuae core) in falcon mode, blitter ON, DSP
> >> ON, FPU ON, ...
> >> 
> >> When I select tos 1.04fr, hatari tells me it's going to switch to
> >> 68000 ...
> >> 
> >> But if I have a look at the gui after the reset, I can see that :
> >> 
> >> - blitter is still activated (at least in the gui)
> >> - DSP is still activated
> >> 
> >> If I launch the demo it still crash.
> >> 
> >> I remove the DSP, and cold reset, it still crash.
> >> Then I remove the Blitter in the gui, it still crash
> >> Then, I add "patch timer D", it still crash
> >> Then I remove "boot faster by patching tos and sysvars : the demo
> >> works.
> >> 
> >> Laurent
> >> 
> >> Le 06/07/2015 22:16, Nicolas Pomarède a écrit :
> >>> Le 06/07/2015 21:17, Laurent Sallafranque a écrit :
> >>>> Hi,
> >>>> 
> >>>> I wanted to listen some soundship music, so I downloaded the
> >>>> following
> >>>> 
> >>>> : http://www.pouet.net/prod.php?which=25855
> >>>> 
> >>>> It seems to crash (double bus/address error => Cpu halted) after the
> >>>> intro (when I press space or when I wait to the end of the intro).
> >>>> 
> >>>> I've tested with hatari oldcpu 1.8 (ST and STE mode) , 1 Mo and 4 Mo
> >>>> 
> >>>> I've also tested with the latest release (same problem).
> >>>> 
> >>>> 
> >>>> In case you didn't notice it before.
> >>> 
> >>> Hi
> >>> 
> >>> seems to work for me, I tested with winuae cpu :
> >>>   - prefetch
> >>>   - cycle exacy
> >>> 
> >>> it works with tos 1.04fr, 2 MB, STF mode ; and it works too with tos
> >>> 1.62fr, STE mode, 2 MB.
> >>> 
> >>> Demo is running from gemdos HD.
> >>> 
> >>> Nicolas