| Re: [hatari-devel] SCSI emulation |
[ Thread Index |
Date Index
| More lists.tuxfamily.org/hatari-devel Archives
]
- To: hatari-devel@xxxxxxxxxxxxxxxxxxx
- Subject: Re: [hatari-devel] SCSI emulation
- From: Uwe Seimet <Uwe.Seimet@xxxxxxxxx>
- Date: Sun, 2 Sep 2018 14:48:44 +0200
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; t=1535892525; s=strato-dkim-0002; d=seimet.de; h=In-Reply-To:References:Message-ID:Subject:To:From:Date: X-RZG-CLASS-ID:X-RZG-AUTH:From:Subject:Sender; bh=NVGm81a63wIaB5sxkXtcLQ2Y1glAP9/vqJXNGmUpQTs=; b=ihEijVJKhuVW6+t1ON2NER3Sox6Oo0n8MHGsrhLWzOkTHBvAkvG67YUQ/ues1nvaCS I82mN53i1BDpHT+Qnh0if9tKTBe5uMOYb5isJZ0Y8hZ0hxj0aeiIXOWAh56MsNqbRRk2 RNqnv4uiEK9B7hmLXs2sQQ3TnejI2/wrGwR4gBy9x+Gl/y+vCn1Ah9UoGmtfiSzQKP5f LIDL5TLDib32Xws5R/zgNs8KHRVgBXh9umxngWOofZpX/lYG7xwqXNotn07jVwidHA0x I5Ladbw5e8oxvTzsd6mVWKIu3VG0N3+fBcv6GIe7h0hvHCaFj8eDbfAT0aXnejXxczfz Xirw==
Hi Thomas,
> Note that I am not booting HDDRIVER from this image, but I am running
> HDDDRIVER.PRG from C:/AUTO. Just tried to boot from the image, but this
> did not work. The log shows:
>
> HDC: Unsupported command (t=1, lun=0, opc=8, cnt=0x1, ctrl=0x0)!
> HDC: Unsupported command (t=1, lun=0, opc=8, cnt=0x1, ctrl=0x0)!
>
> When I map the image to SCSI ID 0 it's the same error when booting:
>
> HDC: Unsupported command (t=0, lun=0, opc=8, cnt=0x1, ctrl=0x0)!
> HDC: Unsupported command (t=0, lun=0, opc=8, cnt=0x1, ctrl=0x0)!
I'm afraid this (but not the other) problem was the result of a slightly
patched version of hdc.c I was using, one that does not support
READ/WRITE (6). (HDDRIVER does not require a drive to support these
optional commands, but TOS needs them to be able to boot.)
Best regards
Uwe