Re: [hatari-devel] IDE emulation and Pure debugger

[ Thread Index | Date Index | More lists.tuxfamily.org/hatari-devel Archives ]


The trace reminds me the trace I get with moonspeeder (an exception2, then the M68000 bus error readind at adress $10)

Maybe something wrong in the 68030 emulation core

Laurent


Le 09/10/2012 12:12, Uwe Seimet a écrit :
Hi,

And more importantly, does PD work if you use just
GEMDOS emulation and don't have any IDE drives?

I.e. is the problem specific to presense of IDE drives?
I ran some more tests and the problem is not related to the presence of
IDE drives. Even with no drives present (except GEMDOS drives) PD crashes
most of the time, but not always. With no AUTO folder in case of a crash
this is the debug output:

Exception 2 (0) at a72e8 -> a72f8!
A-Trap a000 at a8f30 (0xd92d70)
M68000 Bus Error reading at address $10.
Illegal instruction: 4afc at 000A3D12 -> 00000000
Exception 2 (0) at a9616 -> a95da!
M68000 Bus Error reading at address $10.
Illegal instruction: 00e0 at 00000030 -> 00000000
Exception 2 (0) at a9616 -> a95da!
M68000 Bus Error writing at address $fffffc.
Exception 2 (0) at a7394 -> a95da!
M68000 Bus Error writing at address $fffff8.
Exception 2 (0) at a7394 -> a95da!
M68000 Bus Error writing at address $fffff4.

and so on. This is with MMU support switched off. With MMU support
switched on it's even worse, there is a never ending series of bus
errors.

Take care

Uwe







Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/