Re: [crisos] how to reflash from crisos to acme?

[Claudio <claudyus84@xxxxxxxxx>]

2008/8/5, Markus <crisos@xxxxxxxxx>:
> Hi Claudio,
>
> Am Dienstag, 5. August 2008 21:06:24 schrieb Claudio:
>> Hi Markus
>>
>> 2008/8/5, Markus <crisos@xxxxxxxxx>:
>> > Hi Claudio,
>> >
>> > Am Sonntag, 3. August 2008 21:52:20 schrieb Claudio:
>> >> 2008/8/3, Markus <crisos@xxxxxxxxx>:
>> >> > Hi list,
>>
>> CUT!
>>
>> >>                    ^^
>> >> This is the correct way, please ensure that the fox is wired directly
>> >> with your interface eth0
>> >>
>> >> If you need to use another interface use "-d <net_if>", remember that
>> >> you can flash fox trought hub or wifi access point!
>> >
>> > Yes, I understood.
>> > But if you read the next lines I'm having also dificulties flashing the
>> > board
>> > this way! :-(
>> >
>> >
>> > I cross-cabled my PC with the board.
>> > I tried it directly under linux (debian) and also on another PC under
>> > Windows
>> > XP (with flashfox and WinPcap).
>> >
>> > I also set the network card to 10 MBit, Full, AutoNeg OFF  with ethtool.
>> >
>> > None of this worked.
>> >
>> >
>> > Than I monitored the traffic with wireshark (ethereal) when trying to
>> > flash. What I saw there, that the "boot_linux" or better the
>> > "etrax100boot" tried to
>> > access my foxboard with the MAC address 01:40:8c:00:01:00. BUT my fox
>> > board has the 00:40:8C:CD:00:00.
>>
>> Very strange! I never hear this problem.
>>
>> > Maybe this is the answer, why my fox board does not answer to the net
>> > boot? My question now is:
>> >
>> > How does the flash tools know, which MAC to flash?
>> > - Does it come from the image file (when setting with make menuconfig)?
>> > - Does it come from
>> > devboard-R2_01/tools/build/e100boot/cbl/src/net_init.c
>>
>> devboard-R2_01 is the correct choice for foxboard? I don't remember.
>> Your sdk may be configured for some other developer board???
>
> Of course, I'm using the right one. :-)
> The SDK is the one from here: http://www.acmesystems.it/?id=714
> And configured for the fox lx 832.
>
>
>> >   Because there is a macro "SET_ETHER_ADDR" with the first MAC I
>> > mentionend?
>>
>> Have you try to use boot_linux script and etrax100boot from
>> http://downloads.tuxfamily.org/crisos/repository/tool/ ?
>> You can be sure that this version of etrax100boot try to flash the
>> correct mac address ;)
>
> Yes, I did also:
>
> Settings for eth0:
>         Supported ports: [ MII ]
>         Supported link modes:   10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>                                 1000baseT/Full
>         Supports auto-negotiation: Yes
>         Advertised link modes:  Not reported
>         Advertised auto-negotiation: No
>         Speed: 10Mb/s
>         Duplex: Full
>         Port: MII
>         PHYAD: 1
>         Transceiver: external
>         Auto-negotiation: off
>         Supports Wake-on: g
>         Wake-on: d
>         Link detected: yes
> root@pcmarkus:/home/markus/develop/foxboard/flashing$ ./boot_linux -F -d
> eth0 -i fimage40_lx832
> Using internal boot loader: INTERNAL_NW - Network boot (default).
> Starting boot...
> We're doing a flash write, this may take up to a few minutes...
>
>
> Same result! No answer from the fox board. :-(

Realy I could not understand why etrax100boot try to flash a wrong mac address.

I suggest you to report issues to dev-etrax@xxxxxxxx mailing list


> Wireshark says this:
>
> AsustekC_d3:29:72 AxisComm_00:01:00	LLC	U, func=UI; SNAP, OUI 0x00408C
> (Unknown), PID 0x8856
> Destination: AxisComm_00:01:00 (01:40:8c:00:01:00)
>
>

---
CrisOs mailing list
Official multi-language http://www.crisos.org/ mailing list

For unsubscribe send empty mail to: crisos-request@xxxxxxxxxxxxxxxxxxx with subject unsubscribe.