Re: [chrony-dev] SW/HW timestamping on Linux

[ Thread Index | Date Index | More chrony.tuxfamily.org/chrony-dev Archives ]


The program up if you want to have a look. I am still working on the guidelines for use.

  https://github.com/dennypage/ethtscal

My testing has been principally focused on the i354. I will also be testing the i211, which I believe should be very close to the i210, but I need to finish the i354 first. Unfortunately it’s a long iterative process to balance the tx and rx values. 

Denny


On Jan 06, 2017, at 10:22, Denny Page <dennypage@xxxxxx> wrote:

I have a program that will test this for you. Give me a few days to finish cleaning it up.

Denny


On Jan 06, 2017, at 05:04, Miroslav Lichvar <mlichvar@xxxxxxxxxx> wrote:

Could be the measured peer delay used to check if the combined TX/RX
compensation is correct? If I have two identical NICs connected
directly with a short cable on 1gbit, what is the expected peer delay?
With no compensation I see now delay of about 1450 ns between two i210
NICs.




Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/