Re: [hatari-devel] SCU/VME register access?

[ Thread Index | Date Index | More lists.tuxfamily.org/hatari-devel Archives ]


Christian Zietz schrieb:

If someone points me towards the kernel in question and a way to load it
on real hardware, I can do a quick test on my TT.

With some help from Eero (thank you!) I now have a kernel that I can
load on my real TT.

I can confirm:

1.) The unmodified kernel is indeed broken: It hangs in an infinite loop
"unexpected interrupt from 112" due to the active but unhandled VBL IRQ.
This should be reported to m68k linux.

2.) When I patch the kernel (with Ghidra and a hex editor) to write 0x00
to the SCU sys_mask register, it boots, only panicking in the end (as
expected) because I did not provide a root FS in my test.

Regards
Christian
--
Christian Zietz  -  CHZ-Soft  -  czietz@xxxxxxx
WWW: https://www.chzsoft.de/
New GnuPG-Key-ID: 0x8708B34C827B159E




Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/