Re: [hatari-devel] asm56000.ttp problem

[Eero Tamminen <oak@xxxxxxxxxxxxxx>]

Hi,

On lauantai 10 tammikuu 2015, Laurent Sallafranque wrote:
> 1st, it's a bit complicated to copy files to an IDE disk (I tried to use
> both Gemdos drive and IDE drive, the I couldn't see the IDE drive).

You need to specify GEMDOS HD drive that doesn't override IDE partitions.
Easiest it's done with "--gemdos-drive <drive letter>" option.

After boot you also need to select "Install devices" from TOS4 desktop.


> So I used a floppydisk Image and transfered all the Mikro stuff on the
> IDE drive.
> 
> Then, I've tested the whole tomshell compilation and it works perfectly.
> 
> So, the problem is with gemdos emulation.

Can you zip everything [1] needed to reproduce the issue and send
the zip to me for debugging?


	- Eero

[1] tomshell, asm56000, *.asm files, agrep, whole directory structure

> Regards
> Laurent
> 
> Le 09/01/2015 23:25, Laurent Sallafranque a écrit :
> > Thanks a lot Anders,
> > 
> > This image IDE disk works well.
> > Regards
> > Laurent
> > 
> > Le 09/01/2015 21:27, Anders Eriksson a écrit :
> >> On Fri, 9 Jan 2015, Laurent Sallafranque wrote:
> >>> Has anybody got a little IDE image disk that boots under hatari
> >>> which I could use to make the test ?
> >>> 20 Megs would be suffisant enough I think (it was the size of my
> >>> first harddrive on falcon back in 1995 ;)
> >>> 
> >>> Makeide from the hatari tools directory doesn't make a bootable disk.
> >> 
> >> Hello Laurent,
> >> 
> >> I made a 512MiB image that is installed and ready to run with real
> >> Falcon TOS v4.04, get it here:
> >> http://files.dhs.nu/hatari/ide512.zip  (only 500k packed)
> >> 
> >> AHDI driver installed, not very modern, but at least nobody will
> >> complain about copyright issues. But more importantly, it is the
> >> driver that came along with the Falcon together with asm56000.ttp
> >> (developer tools).