|Re: [hatari-devel] asm56000.ttp problem|
[ Thread Index |
| More lists.tuxfamily.org/hatari-devel Archives
Mikro has done a package here : http://ge.tt/1ISHOC82/v/0?c
It works like this, nothing to change. (only in IDE mode)
Le 10/01/2015 00:16, Eero Tamminen a écrit :
On lauantai 10 tammikuu 2015, Laurent Sallafranque wrote:
1st, it's a bit complicated to copy files to an IDE disk (I tried to use
both Gemdos drive and IDE drive, the I couldn't see the IDE drive).
You need to specify GEMDOS HD drive that doesn't override IDE partitions.
Easiest it's done with "--gemdos-drive <drive letter>" option.
After boot you also need to select "Install devices" from TOS4 desktop.
So I used a floppydisk Image and transfered all the Mikro stuff on the
Then, I've tested the whole tomshell compilation and it works perfectly.
So, the problem is with gemdos emulation.
Can you zip everything  needed to reproduce the issue and send
the zip to me for debugging?
 tomshell, asm56000, *.asm files, agrep, whole directory structure
Le 09/01/2015 23:25, Laurent Sallafranque a écrit :
Thanks a lot Anders,
This image IDE disk works well.
Le 09/01/2015 21:27, Anders Eriksson a écrit :
On Fri, 9 Jan 2015, Laurent Sallafranque wrote:
Has anybody got a little IDE image disk that boots under hatari
which I could use to make the test ?
20 Megs would be suffisant enough I think (it was the size of my
first harddrive on falcon back in 1995 ;)
Makeide from the hatari tools directory doesn't make a bootable disk.
I made a 512MiB image that is installed and ready to run with real
Falcon TOS v4.04, get it here:
http://files.dhs.nu/hatari/ide512.zip (only 500k packed)
AHDI driver installed, not very modern, but at least nobody will
complain about copyright issues. But more importantly, it is the
driver that came along with the Falcon together with asm56000.ttp