Re: [chrony-users] PPS correction not being applied

[ Thread Index | Date Index | More chrony.tuxfamily.org/chrony-users Archives ]


What does your chrony.conf look like now?

I have a similar problem, (also using gpsd and Raspberry Pi with GPIO-PPS).

Am 24.02.2017 16:53, schrieb Brian Gieryk:
> Bill, PPS is being referenced as GPS now.
> 
> Miroslav, that was initial fix.
> 
> Now, NMEA offset is +198ms std dev is 7301us
> 
> GPS (PPS) is offset +23 us std dev is 19us.
> 
> Brian
> 
> Sent from my iPhone
> 
>> On Feb 24, 2017, at 08:48, Miroslav Lichvar <mlichvar@xxxxxxxxxx> wrote:
>>
>>> On Fri, Feb 24, 2017 at 08:44:02AM -0700, Brian Gieryk wrote:
>>> Did as suggested, and seems to be working.  NMEA is showing  +/- 2599 us and GPS (PPS) is showing +/- 1831 us.
>>
>> 1800 microseconds is not that good for a PPS. Usually it's just a few
>> microseconds, or better. What does the "chronyc sourcestats" command
>> print?
>>
>> -- 
>> Miroslav Lichvar
>>
>> -- 
>> To unsubscribe email chrony-users-request@xxxxxxxxxxxxxxxxxxxx 
>> with "unsubscribe" in the subject.
>> For help email chrony-users-request@xxxxxxxxxxxxxxxxxxxx 
>> with "help" in the subject.
>> Trouble?  Email listmaster@xxxxxxxxxxxxxxxxxxxx.
>>
> 

-- 
To unsubscribe email chrony-users-request@xxxxxxxxxxxxxxxxxxxx 
with "unsubscribe" in the subject.
For help email chrony-users-request@xxxxxxxxxxxxxxxxxxxx 
with "help" in the subject.
Trouble?  Email listmaster@xxxxxxxxxxxxxxxxxxxx.


Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/