| [proaudio] ffado & Focusrite saffire pro 24 |
[ Thread Index |
Date Index
| More lists.tuxfamily.org/proaudio Archives
]
Hi, I just purchased a cheap Focusrite Saffire Pro 24 yesterday. I've got a few days grace to return it if I can't get it working. I just got libffado to compile, and recompiled jackd with ieee1394 support, but now jack won't start at all, even with my on-board sound card. I see at the end of ffado-diag that juju does not support faddo. I thought faddo worked with juju now. The faddo mixer says it can't establish a connection to the d-bus servic. I've never used firewire or ffadoo before. Any advice would be greatly appreciated.
Kind regards Cinder
I'm running...
Gentoo on a
MacBook Pro 7,1.
Linux-3.4.9-gentoo-rt17 amd64
libffado-2.0.1
jack-audio-connection-kit-1.9.8
# lsfirewire
fw0: Linux Firewire Juju
fw1: Focusrite SAFFIRE_PRO_24
#ffado-diag
FFADO diagnostic utility 0.1
============================
(C) 2008 Pieter Palmers
=== CHECK ===
Base system...
kernel version............ 3.4.9-gentoo-rt17
FIXME: implement test for RT kernel
RT patched............... False
old 1394 stack present.... False
old 1394 stack loaded..... False
old 1394 stack active..... False
new 1394 stack present.... True
new 1394 stack loaded..... True
new 1394 stack active..... True
/dev/raw1394 node present. False
Prerequisites (dynamic at run-time)...
gcc................ gcc (Gentoo 4.5.4 p1.0, pie-0.4.7) 4.5.4
g++................ g++ (Gentoo 4.5.4 p1.0, pie-0.4.7) 4.5.4
PyQt............... sh: pyuic: command not found
jackd.............. sh: jackd: command not found
path............. which: no jackd in (/sbin:/bin:/usr/sbin:/usr/bin)
flags............ -L/usr/lib -ljack
libraw1394......... 2.0.8
flags............ -lraw1394
libavc1394......... 0.5.4
flags............ -lavc1394 -lrom1394 -lraw1394
libiec61883........ 1.1.0
flags............ -liec61883 -lraw1394
libxml++-2.6....... 2.34.2
flags............ -pthread -I/usr/include/libxml++-2.6 -I/usr/lib64/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib64/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib64/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -pthread -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lgthread-2.0 -lrt -lglib-2.0
dbus-1............. 1.6.2
flags............ -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -ldbus-1
Prerequisites (static at compile-time)...
gcc................ gcc (Gentoo 4.5.4 p1.0, pie-0.4.7) 4.5.4
g++................ g++ (Gentoo 4.5.4 p1.0, pie-0.4.7) 4.5.4
PyQt............... sh: pyuic: command not found
jackd.............. sh: jackd: command not found
path............. which: no jackd in (/usr/lib64/portage/bin/ebuild-helpers/4:/usr/lib64/portage/bin/ebuild-helpers:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4)
flags............ -L/usr/lib -ljack
libraw1394......... 2.0.8
flags............ -lraw1394
libavc1394......... 0.5.4
flags............ -lavc1394 -lrom1394 -lraw1394
libiec61883........ 1.1.0
flags............ -liec61883 -lraw1394
libxml++-2.6....... 2.34.2
flags............ -pthread -I/usr/include/libxml++-2.6 -I/usr/lib64/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib64/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib64/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -pthread -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lgthread-2.0 -lrt -lglib-2.0
dbus-1............. 1.6.2
flags............ -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -ldbus-1
Hardware...
Host controllers:
01:00.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW643 PCI Express 1394b Controller (PHY/Link) [11c1:5901] (rev 08) (prog-if 10 [OHCI])
Subsystem: Agere Systems Device [11c1:5900]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d3300000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4199
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 2048 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [170 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
CPU info:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
stepping : 10
microcode : 0xa0b
cpu MHz : 2394.000
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips : 4778.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
stepping : 10
microcode : 0xa0b
cpu MHz : 2394.000
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips : 4778.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
Configuration...
IRQ information
Hardware Interrupts:
--------------------
IRQ 0: PID: None, count: [3825158, 3825158], Sched None (priority None), drivers: ['timer']
IRQ 8: PID: None, count: [52, 52], Sched None (priority None), drivers: ['rtc0']
IRQ 9: PID: None, count: [114801, 114801], Sched None (priority None), drivers: ['acpi']
IRQ 16: PID: None, count: [311, 311], Sched None (priority None), drivers: ['nouveau']
IRQ 17: PID: None, count: [0, 0], Sched None (priority None), drivers: ['ohci_hcd:usb3']
IRQ 18: PID: None, count: [174903, 174903], Sched None (priority None), drivers: ['ohci_hcd:usb4']
IRQ 20: PID: None, count: [114022, 114022], Sched None (priority None), drivers: ['ehci_hcd:usb2', 'snd_hda_intel']
IRQ 22: PID: None, count: [22, 22], Sched None (priority None), drivers: ['ehci_hcd:usb1']
IRQ 43: PID: None, count: [110136, 110136], Sched None (priority None), drivers: ['ahci']
IRQ 44: PID: None, count: [309, 309], Sched None (priority None), drivers: ['firewire_ohci']
IRQ 45: PID: None, count: [51260, 51260], Sched None (priority None), drivers: ['eth0']
Software Interrupts:
--------------------
=== REPORT ===
FireWire kernel drivers:
The new FireWire kernel stack is loaded.
This stack is not supported by FFADO. Please use the old stack.
_____________________________________________________________
Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com
Join Linux Discussions! --> http://Community.LinuxWaves.com