Re: [hatari-users] Can’t use TOS 2.06 with Hatari 1.50/1.62 - SOLVED: broken newdesk.inf

[Götz Hoffart <goetz@xxxxxxxxxx>]

Am 01.10.2012 um 09:35 schrieb Eero Tamminen <oak@xxxxxxxxxxxxxx>:

> Could you send your Hatari hatari.cfg file[1] and output from
> Hatari's "trace --gemdos" option when you run Hatari with
> TOS 2.06?

It’s "hatari --trace gemdos" (didn’t know that option, good to know!) and when it printed the stuff in the Terminal it was clear: a broken or otherwise corrupted newdesk.inf. After renaming to newdesk.inx it worked.

The original output:

--------------------------------------------------------------------------------------------------------
[…]
GEMDOS: C:\COPS.inf -> host: /Users/gh/Documents/Atari-Transfer/COPS.INF
-> FD 0 (read-only)
GEMDOS 0x42 Fseek(398, 64, 0)
GEMDOS 0x3F Fread(64, 14, 0xf10d8)
GEMDOS 0x3E Fclose(64)
GEMDOS 0x19 Dgetdrv()
GEMDOS 0x0E Dsetdrv(0x2)
GEMDOS 0x19 Dgetdrv()
GEMDOS 0x0E Dsetdrv(0x2)
GEMDOS 0x2F Fgetdta()
GEMDOS 0x1A Fsetdta(0xb1b4)
GEMDOS 0x4E Fsfirst("C:\DESKICON.RSC", 0x7)
GEMDOS: C:\DESKICON.RSC -> host: /Users/gh/Documents/Atari-Transfer/deskicon.rsc
GEMDOS 0x4F Fsnext()
GEMDOS 0x1A Fsetdta(0x9b3a)
GEMDOS 0x3D Fopen("C:\DESKICON.RSC", read-only)
GEMDOS: C:\DESKICON.RSC -> host: /Users/gh/Documents/Atari-Transfer/deskicon.rsc
-> FD 0 (read-only)
GEMDOS 0x3F Fread(64, 36, 0x75a4)
GEMDOS 0x48 Malloc(0x9BC)
GEMDOS 0x42 Fseek(0, 64, 0)
GEMDOS 0x3F Fread(64, 2492, 0x10632c)
GEMDOS 0x3E Fclose(64)
GEMDOS 0x48 Malloc(0xAB8)
GEMDOS 0x48 Malloc(0x1000)
GEMDOS 0x48 Malloc(0x840)
GEMDOS 0x48 Malloc(0x781)
GEMDOS 0x48 Malloc(0x609318)			oooh, yes :-)
GEMDOS 0x48 Malloc(0x609318)
--------------------------------------------------------------------------------------------------------
and then the error occured.

Thanks for pointing me to the solution!

Regards
Götz