| Re: [hatari-devel] video freq set to 60 Hz instead of 50 Hz for Falcon VGA |
[ Thread Index |
Date Index
| More lists.tuxfamily.org/hatari-devel Archives
]
- To: hatari-devel@xxxxxxxxxxxxxxxxxxx
- Subject: Re: [hatari-devel] video freq set to 60 Hz instead of 50 Hz for Falcon VGA
- From: Laurent Sallafranque <laurent.sallafranque@xxxxxxx>
- Date: Sun, 25 Feb 2024 17:18:35 +0100
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/simple; d=free.fr; s=smtp-20201208; t=1708877916; bh=efWUGi7NmZ+rx1Pc7mVWQLsbZZ29YhhNs6hsx3rLNew=; h=Date:Subject:To:References:From:In-Reply-To:From; b=O0fgd0Y4fa+xguDx8SdChY9rek4tpS8A0L7UAEriu2fb1n7dCwIWjiZOmIDw9v0f9 cVVS6wD/09TC9JyCrKKh/g72iE9tRViA/ivbHZ7ct3A4gRNFg+0QE0K2+aiW/ymQqf +AFnvM3R8+IgVBKwIY5r0ak3vFPcMfg3L6X0yU9XGRFgp3xKHev/ByH+prFLLGRig8 07oEUsRO9b7nIuzRGTdmpqV45sBNyh4By48xof15Tx+tyVIR+w4wFIRiFZHe/d3oyO jBeAmC3FkL9Z8Cv9HNA4r/0XXOFJApvoUSUClpaBi4Tbvf/ofq4kDHQb75DNmM+v6E 8vBRG2Myhf8zQ==
Ok, I'll have a look. Which test was it ? (just to compare with previous
hatari versions) ?
Le 25/02/2024 à 15:38, Nicolas Pomarède a écrit :
Hi
I noticed that so far video vertical freq was set to 50 Hz when using
Falcon with a VGA monitor, which doesn't seem to be correct.
VGA mode can give many vertical freq (by tweaking the correct HW
registers) but for the default GEM desktop it should be 60 Hz
50 Hz is used for RGB and TV types.
Eero or Laurent, as I think you're more familiar with Falcon than me,
can you check if this breaks something with demos known to work in
Hatari and VGA mode ? (especially for the audio part, it sounds choppy
in one of my test, but I'm not sure this test would work anyway with
Hatari :) )
Nicolas