Re: [hatari-devel] Falcon tests

[ Thread Index | Date Index | More lists.tuxfamily.org/hatari-devel Archives ]


Le 06/06/2022 à 09:07, Anders Eriksson a écrit :
------- Original Message -------
On Sunday, June 5th, 2022 at 12:41, Eero Tamminen <oak@xxxxxxxxxxxxxx> wrote:


Hi,

On 5.6.2022 12.22, Eero Tamminen wrote:


If these had audio issues, diff was not clear enough for me to hear:
* DHS: 4orce (4K)
* New Beat: Flu (4K)

Anders, as I assume you to be familiar with "4orce", maybe you could
check it better? :-)

These two sound fine, they not using PCM/DMA just the YM3439.


However I think the emulated machine feel slow, not that my host machine is too slow to emulate, it doesn't skip any frames with AUTO frameskip.


So I ran Gembench 4 for a quick test, and yeah it confirms that it runs sluggish.

GEM Bench v4.03             ス Ofir Gal - 3 March 95
============================================
Falcon 030 TOS 4.04
AES v3.40
GEMDOS v0.48
MiNT not present
Blitter Enabled
NVDI not present
Video Mode: 640*480*2
LineF FPU installed
Run and Malloc from STRAM
Ref: F030 + FPU, 640*480*2
Hatari 2.4.0 dev 20220604
No prefetch, no cycle exact, no mmu,
no softfpu, 24bit addressing on
============================================
GEM Dialog Box:             4.425     79%
VDI Text:                   4.305     78%
VDI Text Effects:          13.050     57%
VDI Small Text:             4.860     77%
VDI Graphics:              21.160     41%
GEM Window:                 1.760     79%
Integer Division:           1.145    270%
Float Math:                 0.250    136%
RAM Access:                 3.570     61%
ROM Access:                 3.565     58%
Blitting:                   1.170     95%
VDI Scroll:                 2.955     89%
Justified Text:             4.105     79%
VDI Enquire:                2.205     71%
New Dialogs:                6.260     71%
============================================
Graphics:                             74%
CPU:                                 131%
Average:                              89%


Perhaps my settings are wrong?

hatari --machine falcon --dsp emu --cpulevel 3 --cpuclock 16 --fpu 68882 --cpu-exact 0 --compatible 0 --addr24 1 --timer-d 0 --memsize 14 --window --frameskips 0 --drive-led false --monitor vga --avi-vcodec png --png-level 2 --sound 49170 --fast-boot 1 --tos /xyz/Falcon/404.img --gemdos-drive c --harddrive /xyz/Atari


Hi

do you get different results with hatari 2.3.1 ? (it shouldn't)

for me, it's just that 68030 cycles counting is not accurate yet, some intructions will take more/less cycles than real HW and in the end you don't get 100% for all tests.



Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/