Re: [hatari-devel] floppy media change on TT

[ Thread Index | Date Index | More lists.tuxfamily.org/hatari-devel Archives ]


Nicolas Pomarède schrieb:

> Seeing Roger's test on his TT, where bit 4 was always 0 (ie inserted) it
> seems though that not all TT had a compatible drive with such pin 34.

If Roger tested while the drive was *not* selected (via the bit in the
YM2149 register), even with a drive that supports that signal he would
have always gotten a 0. This is because, as mentioned, the drive only
sets this line (and therefore the bit to 1) when it's selected. At least
my drive does.

Regards
Christian
--
Christian Zietz  -  CHZ-Soft  -  czietz@xxxxxxx
WWW: http://www.chzsoft.de/
PGP/GnuPG-Key-ID: 0x52CB97F66DA025CA / 0x6DA025CA



Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/