Re: [hatari-devel] Hatari hangs with NVDI when MMU is enabled

[ Thread Index | Date Index | More lists.tuxfamily.org/hatari-devel Archives ]


Uwe Seimet schrieb:

> Does not seem to be a regression, the probably is the same with the
> Hatari 2.1.0 release version.

Yes, with your config, I can reproduce the issue. Initial analysis shows:

- The endless loop happens with 8 MB or 14 MB of ST-RAM, which
incidentally is where Hatari disables the TOS RAM test. I don't know
whether this is related, though. It works e.g. with 4 MB if ST-RAM.
- NVDI also works with MMU when I tick either "Prefetch mode" or "Cycle
exact" in the CPU options.

Maybe this already rings a bell with the Hatari CPU experts, otherwise
I'll have a deeper look later.

Regards
Christian
-- 
Christian Zietz  -  CHZ-Soft  -  czietz@xxxxxxx
WWW: http://www.chzsoft.de/
PGP/GnuPG-Key-ID: 0x52CB97F66DA025CA / 0x6DA025CA



Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/