Re: [hatari-devel] New version of hatari unstable ?

[Laurent Sallafranque <laurent.sallafranque@xxxxxxx>]

Then, hatari goes to the desktop but there is a vertical line of pixels 
on the desktop, AND NO FLOPPY DISK ICONS.




Le 30/06/2017 à 23:02, Laurent Sallafranque a écrit :
> I've got this at the very beginning :
>
> Illegal instruction: 42c0 at 00E0039A -> 00E003BE
> Bus Error at address $ffff8e09, PC=$e00402 addr_e3=e00406 op_e3=4a38
> Bus Error at address $fff00039, PC=$e00418 addr_e3=e0041e op_e3=4a39
> Bus Error at address $fffffa40, PC=$e004c0 addr_e3=e004c4 op_e3=3038
> Bus Error at address $ffff8e0d, PC=$e00584 addr_e3=e0058a op_e3=11fc
> Bus Error at address $ffff8c83, PC=$e029b8 addr_e3=e029bc op_e3=4a38
> Bus Error at address $ffff8e09, PC=$e02908 addr_e3=e0290c op_e3=4a38
>
> then the memory test,
>
> then
> Bus Error at address $fff00039, PC=$e01666 addr_e3=e0166c op_e3=4a39
> Bus Error at address $fff00039, PC=$e01666 addr_e3=e0166c op_e3=4a39
>
>
> Then :
>
> If I've got a floppy inserted, it boots from the floppy
> If I don't, there's an alert window that appears whith tells me : 
> "impossible to allow a window memory" and I can click on "confirm"
> Then, hatari goes to the desktop but there is a vertical line of 
> pixels on the desktop.
>
>
> If I come from atari falcon to atari STE, it doesn't even go to the 
> desktop
>
> I can send some screenshot if that can help.
>
> Laurent
>
>
>
> Le 30/06/2017 à 22:46, Eero Tamminen a écrit :
> > Hi,
> >
> > On 06/30/2017 11:43 PM, Laurent Sallafranque wrote:
> > > That's strange, I've recompiled also for SDL 1.2, and I've got the same
> > > problems.
> > > I've removed the config files.
> > >
> > > I can't start hatari in ste mode with Tos 2.06 (fr)
> >
> > TOS 2.06 (several language versions) boots fine for me with latest
> > Hatari Mercurial version, at least when compiled with SDL 2.
> >
> > Could you describe in exact steps what doesn't work?
> >
> >
> >     - Eero
> >
> > > I can start with tos 1.62
> > >
> > > Laurent
> > >
> > >
> > >
> > > Le 30/06/2017 à 21:25, Troed Sångberg a écrit :
> > > > If I understood your description correctly then no, I don't have that
> > > > problem with my macOS "nightly" from today. It's SDL2 though.
> > > >
> > > > /Troed
> > > >
> > > >
> > > > On Fri, Jun 30, 2017 at 7:28 PM, Laurent Sallafranque
> > > > <laurent.sallafranque@xxxxxxx <mailto:laurent.sallafranque@xxxxxxx>>
> > > > wrote:
> > > >
> > > >     Hi all,
> > > >
> > > >     Is it me or the current version of hatari has some problems ?
> > > >
> > > >
> > > >     I'm usually booting in falcon mode.
> > > >
> > > >     When I try to change parameters in the gui to boot in ste 4Mo tos
> > > >     french 2.06, it never goes to the desktop
> > > >
> > > >     Same with tos 1.62 or when I try to boot in ST mode
> > > >
> > > >
> > > >     I've erased my hatari.cfg file by saving the configuration that
> > > >     doesn't boot.
> > > >
> > > >     It seems to boot correctly with tos 1.62 (STE, 4Mo,...) but not
> > > >     with TOS 2.06.
> > > >
> > > >
> > > >     (I've compiled hatari with SDL 1)
> > > >
> > > >
> > > >     Is it me ?
> > > >
> > > >     Regards
> > > >
> > > >     Laurent