Re: [hatari-devel] New version of hatari unstable ?

[ Thread Index | Date Index | More Archives ]

I've got this at the very beginning :

Illegal instruction: 42c0 at 00E0039A -> 00E003BE
Bus Error at address $ffff8e09, PC=$e00402 addr_e3=e00406 op_e3=4a38
Bus Error at address $fff00039, PC=$e00418 addr_e3=e0041e op_e3=4a39
Bus Error at address $fffffa40, PC=$e004c0 addr_e3=e004c4 op_e3=3038
Bus Error at address $ffff8e0d, PC=$e00584 addr_e3=e0058a op_e3=11fc
Bus Error at address $ffff8c83, PC=$e029b8 addr_e3=e029bc op_e3=4a38
Bus Error at address $ffff8e09, PC=$e02908 addr_e3=e0290c op_e3=4a38

then the memory test,

Bus Error at address $fff00039, PC=$e01666 addr_e3=e0166c op_e3=4a39
Bus Error at address $fff00039, PC=$e01666 addr_e3=e0166c op_e3=4a39

Then :

If I've got a floppy inserted, it boots from the floppy
If I don't, there's an alert window that appears whith tells me : "impossible to allow a window memory" and I can click on "confirm" Then, hatari goes to the desktop but there is a vertical line of pixels on the desktop.

If I come from atari falcon to atari STE, it doesn't even go to the desktop

I can send some screenshot if that can help.


Le 30/06/2017 à 22:46, Eero Tamminen a écrit :

On 06/30/2017 11:43 PM, Laurent Sallafranque wrote:
That's strange, I've recompiled also for SDL 1.2, and I've got the same
I've removed the config files.

I can't start hatari in ste mode with Tos 2.06 (fr)

TOS 2.06 (several language versions) boots fine for me with latest
Hatari Mercurial version, at least when compiled with SDL 2.

Could you describe in exact steps what doesn't work?

    - Eero

I can start with tos 1.62


Le 30/06/2017 à 21:25, Troed Sångberg a écrit :
If I understood your description correctly then no, I don't have that
problem with my macOS "nightly" from today. It's SDL2 though.


On Fri, Jun 30, 2017 at 7:28 PM, Laurent Sallafranque
<laurent.sallafranque@xxxxxxx <mailto:laurent.sallafranque@xxxxxxx>>

    Hi all,

    Is it me or the current version of hatari has some problems ?

    I'm usually booting in falcon mode.

    When I try to change parameters in the gui to boot in ste 4Mo tos
    french 2.06, it never goes to the desktop

    Same with tos 1.62 or when I try to boot in ST mode

    I've erased my hatari.cfg file by saving the configuration that
    doesn't boot.

    It seems to boot correctly with tos 1.62 (STE, 4Mo,...) but not
    with TOS 2.06.

    (I've compiled hatari with SDL 1)

    Is it me ?



Mail converted by MHonArc 2.6.19+