Re: [hatari-devel] Tests with the cycle exact fix 68030

[Laurent Sallafranque <laurent.sallafranque@xxxxxxx>]

I've got the same version as you 2 (same md5).
It works well for me (cycle exact is on, MMU is OFF)

If needed, we can compare all our parameters in case one is different.

Laurent



Le 06/02/2017 à 23:38, Nicolas Pomarède a écrit :
> Le 06/02/2017 à 23:09, Eero Tamminen a écrit :
> > Hi,
> >
> > On 02/06/2017 11:47 AM, Nicolas Pomarède wrote:
> > > Le 05/02/2017 à 23:58, Eero Tamminen a écrit :
> > > > > Bounds 2 : OK
> > > >
> > > > For me, Bound 2 still requires disabling CPU exact mode???
> > > >
> > > > (Bound works fine now without disabling that & prefetch though.)
> > >
> > > just tested bound2 with CE mode + 4 MB RAM and demo works correctly.
> >
> > That's weird, for me it freezes here:
> > $0001fb30 : btst   #1,$ffffa202.w  50.00% (17091199, 153835170, 0, 639)
> > $0001fb36 : beq.s  $1fb30          50.00% (17091201, 102551221, 0, 161)
> > [...]
> > $0002170a : addq.l #1,$0462.w       0.00% (800, 8000, 0, 1600)
> > $0002170e : addq.l #1,$0466.w       0.00% (800, 6400, 0, 1600)
> > $00021712 : rte                     0.00% (800, 8800, 0, 3200)
> >
> > Unless I either disable CE or enable MMU (which also disables CE).
> >
> > Do you have the same binary:
> > $ md5sum bound2.prg
> > bfccd5b37618f6434de2655f53f853ea  bound2.prg  (11729 bytes)
> > ?
> Yes, same md5.
> The code above waits for DSP transmit empty ; just in case, are you 
> sure DSP is enabled in your case ?