[hatari-devel] Re: kontakts

[ Thread Index | Date Index | More lists.tuxfamily.org/hatari-devel Archives ]


Hello,

Please check the jstest output for your device if the axis indicators to
change or only ON/OFF mappings for the buttons appear.

If your device does not produce any axis events but button presses only,
you are out of luck with the current state of Hatari's source code.

All I can tell you in this case, is to contact the Hatari develeopment
mailing list, see CC 

For information on Jabber, please consult Wikipedia or the like. I'm
sure there are CLI bsed clients available.

Regards,
Matthias

Am Sonntag, den 13.05.2012, 14:13 +0200 schrieb sheevastar: 
> Hi, 
> 
> I do not know how to use / install JABBER with centerim. I am using linux mostly with CLI. Is the jabber secured? 
> 
> A new feature or workaround would be great. Since jscal change (remapping) did not work, thus I must change the SDL / hatari settings of this gamepad. 
> 
> my retrolink has no stick:
> http://www.amazon.com/Retro-Classic-Controller-Nintendo-Entertainment-System/dp/B00281PFQI
> 
> Since there is no stick like other regular gamepads, i.e. http://www-mp3.us/wp-content/uploads/2009/04/logitech_gamepad.jpg, hatari does not work (up, down, ...)
> The new featuring for settings of joystick would be anytime welcome. 
> 
> Could I eventually change the .hatari/config files to make this retrolink usb gamepad to work?
> 
> I am looking forward to hearing you,
> 
> Yours sincerely,
> Sheeva
> 
> 
> On Sun, May 13, 2012 at 09:45:38AM +0200, Matthias Arndt wrote:
> > Hello,
> > 
> > I'm not using ICQ anymore but you may contact me through Google Talk
> > and/or Jabber (see my ID below)
> > 
> > For your joystick problem, well I ran into similar ones and the only
> > solution was to patch the joystuck subsystem for Hatari.
> > 
> > You have to compile a recent build of Hatari (get latest trunk version
> > from Mercurial) and patch the device table located in the file joy.c,
> > function Joy_Init()
> > 
> > This is a lookup table to assign other values for X and Y axis of the
> > joystick and they are assigned by the SDL joystick name.
> > 
> > So you need the information beforehand which axis actually produce the
> > right inputs. Use the jstest tool and observe which axis do move with
> > the stick and/or pad. Then enter the correct values.
> > 
> > (BTW if you use the same Speedlink gamepad I showed in my blog, the
> > first entry within this table should already work.)
> > 
> > In the future this information is intended to be saved to configuration
> > files so noone has to fix it within Hatari itself.
> > 
> > At the moment, I lack the time to implement this feature.
> > 
> > Regards,
> > Matthias
> > 
> > Am Samstag, den 12.05.2012, 23:52 +0200 schrieb sheevastar: 
> > > Dear Mathias,
> > > 
> > > I would like to ask you about joystick. Would it be possible to release for debian stable squeeze a newer version of hatari with the possibility to 
> > > configure the joystick inputs.
> > > 
> > > I have troubles to run it, my fire works, but not my arrows (up;down;left;right)
> > > 
> > > I used jscal on debain stable squeeze but thought still same resutsl
> > > 
> > > origianlly when I plug my gamepad (default calibratin from kernel ):
> > >  jscal -p /dev/input/js0 
> > > jscal -s 6,1,0,112,142,5534751,5534751,1,0,112,142,5534751,5534751,1,0,112,142,5534751,5534751,1,0,112,142,5534751,5534751,1,0,112,142,5534751,5534751,1,0,3,3,178956970,178956970 /dev/input/js0
> > > 
> > > jscal -u 6,0,1,2,3,4,40,10,288,289,290,291,292,293,294,295,296,297 /dev/input/js0
> > > 
> > > 
> > > 
> > > And my super modified.
> > > 
> > >   jscal -u 6,3,4,0,1,2,40,10,288,289,290,291,292,293,294,295,296,297 /dev/input/js0
> > >   fire is here working
> > > 
> > > but still hatari arrows are not workking.
> > > 
> > > My icq : icq_uin 305686267
> > > 
> > > Kind regards,
> > > S.
> > 
> > -- 
> > Matthias Arndt <marndt@xxxxxxxxxxxxxx>
> > PGP-Key: http://www.final-memory.org/files/marndt.asc
> > Jabber: simonsunnyboy@xxxxxxxxxxxxxxxx
> > 

-- 
Matthias Arndt <marndt@xxxxxxxxxxxxxx>
PGP-Key: http://www.final-memory.org/files/marndt.asc
Jabber: simonsunnyboy@xxxxxxxxxxxxxxxx




Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/