| Re: [hatari-devel] problems in b/w mode |
[ Thread Index |
Date Index
| More lists.tuxfamily.org/hatari-devel Archives
]
Hi,
On sunnuntai 08 tammikuu 2012, Thomas Huth wrote:
> > >>> CYCLES_PER_FRAME is:
> > (gdb) print nScanlinesPerFrame*nCyclesPerLine
> > $11 = 254508
> > (gdb) print nScanlinesPerFrame
> > $13 = 501
> > (gdb) print nCyclesPerLine
> > $14 = 508
> >
> > Which of the above values is wrong?
>
> nScanlinesPerFrame = 501 is the setting for monochrome mode (color
> uses 313 or 263), and nCyclesPerLine = 508 is the setting for 60 Hz
> color mode (monochrome uses 224 cycles instead).
>
> ==> The timings were still mixed between mono and color.
>
> I tried another fix, and I really really think it should be fine now.
On quick testing everything seems fine now.
> Maybe this is a good point in time now to test your new tosboot
> regression script ...
Next I'll do that.
As I could earlier run it only with older Hatari versions and
things seem to boot slower with the latest one, I may need to
make some waits (before taking screenshot) longer.
After those it should be usable by anybody. :-)
- Eero