Re: [crisos] Darwinfox watchdog?

[ Thread Index | Date Index | More lists.tuxfamily.org/crisos Archives ]


2009/10/15 J S <sippis1976@xxxxxxxxx>:
> Hi,
>
> I' ran into a bit strange behavior with the etrax watchdog:
>
> We've had some problems under "extermic" conditions with our Foxboard-based
> product. The problem starts from usb-serial driver's misbehaviour, so I
> started checking the driver and watchdog.
>
> I did some tests and found the following thing: If there is a forever-loop
> in the usbserial driver, the watchdog does nothing? The device is totally
> jammed until someone gives it a hard reset. The watchdog is enabled during
> boot, there is a note "Enabling watchdog..." in dmesg.
>
> The test in detail:
>
> I added a forever-loop while(1){} to the beginning of the function
> serial_open (file: usb-serial.c).
>
> We are currently (still) using Darwinfox SDK.
>

Using outdated DarwinFox SDK you are losing more than 30 improvement
https://dev.openwrt.org/search?changeset=on&q=claudio&page=3&noquickjump=1

Specially usb one: https://dev.openwrt.org/changeset/16660

Regards

---
CrisOs mailing list
Official multi-language http://www.crisos.org/ mailing list

For unsubscribe send empty mail to: crisos-request@xxxxxxxxxxxxxxxxxxx with subject unsubscribe.


Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/