RE: [crisos] FoxGM Support on Crisos???

[<Christophe.Pouly@xxxxxxxxxxxx>]

Hi,

ok,thank you for the tip... now I have the setbits command on my
foxboad, but when I like to turn on the Modem on the FoxGM using
"setbits -p b -b 7 -s 1", I have an error: [unable to open device
/dev/gpiob]

Then I have create the GPIO devices files:
	mknod /dev/gpioa c 120 0
	mknod /dev/gpiob c 120 1
	mknod /dev/gpiog c 120 3

....but the result is still the same [unable to open device /dev/gpiob]
:-(

Do you have any idea?

Thank you for your help!
Regards,
Christophe



-----Original Message-----
From: Listengine [mailto:listengine@xxxxxxxxxxxxxxxxx] On Behalf Of
Claudio
Sent: mercredi, 3. septembre 2008 22:49
To: crisos@xxxxxxxxxxxxxxxxxxx
Subject: Re: [crisos] FoxGM Support on Crisos???

Hi

2008/9/1  <Christophe.Pouly@xxxxxxxxxxxx>:
> Hi,
>
> I have now resolve the problem I had before, it was a problem with the
> ttyS1 device...
>
> But I have now another problem. I like to turn on my modem by software
> like describe here (http://www.acmesystems.it/?id=13 ) using setbits.
> But unfortunately this feature is not enable by default on the crisos.
I

You should try to update/install foxboard-utils as package.
Try ipkg update && ipkg install foxboard-utils



> have tried to enable GPIO support in make kernel_menuconfig ->
"Drivers
> for built-in interfaces", but I have the following error when I
compile
> the kernel with "make V=99":
>
>        arch/cris/arch-v10/drivers/gpio_syscalls.c:2:26: error:
> Linux/config.h: No such file or directory
>
> Do you have any idea?
> Thank you for your help,
> Best Regards,
> Christophe
>
>
>
>
> -----Original Message-----
> From: Listengine [mailto:listengine@xxxxxxxxxxxxxxxxx] On Behalf Of
> Claudio
> Sent: lundi, 1. septembre 2008 13:43
> To: crisos@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [crisos] FoxGM Support on Crisos???
>
> 2008/8/25  <Christophe.Pouly@xxxxxxxxxxxx>:
>> Hi,
>>
>>
>>
>> I like to use the FoxGM add-on board with crisos. I have install the
> cris
>> toolchain from source and then download the SDKF from svn trunk
>> (http://crisos.tuxfamily.org/dokuwiki/doku.php?id=documentation:index
> ). The
>> I have try to personalize my kernel using "make kernel_menuconfig"
and
> "
>> make menuconfig" (enabling foxGM and i2c bus) but unfortunately my
>> personalized image won't boot on my Fox Board.
>>
> Hi Christophe Pouly
> can you better explain what s happen?
> The board can be flashed and the red led freeze on?
>
>>
>>
>> Does someone have some experience with foxGM on crisos?
>>
>>
>>
>> Thanks in advance for your help,
>>
>> Regards,
>>
>> Christophe
>
>
>
> --
> Claudio
> User linux #415284
> - http://www.crisos.org/
>
> ---
> CrisOs mailing list
> Official multi-language http://www.crisos.org/ mailing list
>
> For unsubscribe send empty mail to: crisos-request@xxxxxxxxxxxxxxxxxxx
> with subject unsubscribe.
>
> ---
> CrisOs mailing list
> Official multi-language http://www.crisos.org/ mailing list
>
> For unsubscribe send empty mail to: crisos-request@xxxxxxxxxxxxxxxxxxx
with subject unsubscribe.
>



-- 
Claudio
User linux #415284
- http://www.crisos.org/

---
CrisOs mailing list
Official multi-language http://www.crisos.org/ mailing list

For unsubscribe send empty mail to: crisos-request@xxxxxxxxxxxxxxxxxxx
with subject unsubscribe.

---
CrisOs mailing list
Official multi-language http://www.crisos.org/ mailing list

For unsubscribe send empty mail to: crisos-request@xxxxxxxxxxxxxxxxxxx with subject unsubscribe.