| [LA-discussions] problème au démarrage Ubuntu 7.10 après install |
[ Thread Index |
Date Index
| More linuxarverne.org/discussions Archives
]
Bonjour.
J'ai réussi à démarrer Ubuntu après installation en débranchant un petit
module de la tour qui sert à mon avis à lire des cartes mémoire
d'appareil photo ou autres. Mais quand même le démarrage est lent.
Voici mon dmseg :
Code:
root@manu-desktop:/var/log# cat ./dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun
Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f51e0
[ 0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65520
[ 0.000000] HighMem 65520 -> 65520
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65520
[ 0.000000] On node 0 totalpages: 65520
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60945 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6C20 checksum 0
[ 0.000000] ACPI: RSDP 000F6C20, 0014 (r0 KT400 )
[ 0.000000] ACPI: RSDT 0FFF3000, 002C (r1 KT400 AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 KT400 AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: DSDT 0FFF30C0, 42A7 (r1 KT400 AWRDACPI 1000
MSFT 100000E)
[ 0.000000] ACPI: FACS 0FFF0000, 0040
[ 0.000000] ACPI: APIC 0FFF7380, 006E (r1 KT400 AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
10000000:eec00000)
[ 0.000000] Built 1 zonelists. Total pages: 65009
[ 0.000000] Kernel command line:
root=UUID=db8141a2-ccf2-40e3-ba53-dc6b22d25043 ro single
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1826.006 MHz processor.
[ 15.337993] Console: colour VGA+ 80x25
[ 15.340144] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 15.340373] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 15.348836] Memory: 248076k/262080k available (2015k kernel code,
13456k reserved, 916k data, 364k init, 0k highmem)
[ 15.348901] virtual kernel memory layout:
[ 15.348902] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 15.348903] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.348905] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 15.348906] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 15.348908] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 15.348909] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 15.348911] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 15.349229] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 15.349355] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 15.429316] Calibrating delay using timer specific routine.. 3655.51
BogoMIPS (lpj=7311034)
[ 15.429430] Security Framework v1.0.0 initialized
[ 15.429477] SELinux: Disabled at boot.
[ 15.429533] Mount-cache hash table entries: 512
[ 15.429728] CPU: After generic identify, caps: 0383fbff c1c3fbff
00000000 00000000 00000000 00000000 00000000
[ 15.429739] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 15.429784] CPU: L2 Cache: 512K (64 bytes/line)
[ 15.429826] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000
00000420 00000000 00000000 00000000
[ 15.429838] Compat vDSO mapped to ffffe000.
[ 15.429890] Checking 'hlt' instruction... OK.
[ 15.445476] SMP alternatives: switching to UP code
[ 15.445772] Freeing SMP alternatives: 11k freed
[ 15.446170] Early unpacking initramfs... done
[ 15.803100] ACPI: Core revision 20070126
[ 15.803252] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 15.807600] CPU0: AMD Athlon(tm) XP 2500+ stepping 00
[ 15.807731] Total of 1 processors activated (3655.51 BogoMIPS).
[ 15.808507] ENABLING IO-APIC IRQs
[ 15.808870] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.952660] Brought up 1 CPUs
[ 15.952894] Booting paravirtualized kernel on bare hardware
[ 15.953020] Time: 9:08:25 Date: 07/06/108
[ 15.953094] NET: Registered protocol family 16
[ 15.953250] EISA bus registered
[ 15.953303] ACPI: bus type pci registered
[ 15.960880] PCI: PCI BIOS revision 2.10 entry at 0xfb350, last bus=1
[ 15.960924] PCI: Using configuration type 1
[ 15.960964] Setting up standard PCI resources
[ 15.963943] ACPI: EC: Look up EC in DSDT
[ 15.967836] ACPI: Interpreter enabled
[ 15.967878] ACPI: (supports S0 S3 S4 S5)
[ 15.968080] ACPI: Using IOAPIC for interrupt routing
[ 15.974472] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.974519] PCI: Probing PCI hardware (bus 00)
[ 15.974923] PCI quirk: region 4000-407f claimed by vt8235 PM
[ 15.974968] PCI quirk: region 5000-500f claimed by vt8235 SMB
[ 15.975302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.997793] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11
12 14 15)
[ 15.998364] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11
12 14 15)
[ 15.998933] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11
12 14 15)
[ 15.999501] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11
12 14 15)
[ 16.000047] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 16.000653] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 16.001255] ACPI: PCI Interrupt Link [LNK0] (IRQs 1 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 16.001856] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 16.002476] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 16.002773] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 16.003088] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 16.003384] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[ 16.003631] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.003684] pnp: PnP ACPI init
[ 16.003729] ACPI: bus type pnp registered
[ 16.007604] pnp: PnP ACPI: found 16 devices
[ 16.007646] ACPI: ACPI bus type pnp unregistered
[ 16.007690] PnPBIOS: Disabled by ACPI PNP
[ 16.007802] PCI: Using ACPI for IRQ routing
[ 16.007845] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 16.030610] NET: Registered protocol family 8
[ 16.030652] NET: Registered protocol family 20
[ 16.030768] pnp: 00:00: iomem range 0xcb000-0xcbfff has been reserved
[ 16.030813] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 16.030857] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 16.030902] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 16.030948] pnp: 00:02: ioport range 0x4000-0x407f has been reserved
[ 16.030992] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 16.032504] Time: tsc clocksource has been installed.
[ 16.061342] PCI: Bridge: 0000:00:01.0
[ 16.061383] IO window: c000-cfff
[ 16.061425] MEM window: e8000000-e9ffffff
[ 16.061467] PREFETCH window: d8000000-e7ffffff
[ 16.061522] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 16.061535] NET: Registered protocol family 2
[ 16.100493] IP route cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 16.100588] TCP established hash table entries: 8192 (order: 4, 98304
bytes)
[ 16.100826] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 16.100996] TCP: Hash tables configured (established 8192 bind 8192)
[ 16.101039] TCP reno registered
[ 16.112533] checking if image is initramfs... it is
[ 16.563794] Switched to high resolution mode on CPU 0
[ 16.787289] Freeing initrd memory: 7331k freed
[ 16.787880] audit: initializing netlink socket (disabled)
[ 16.787939] audit(1218013706.080:1): initialized
[ 16.790034] VFS: Disk quotas dquot_6.5.1
[ 16.790129] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.790285] io scheduler noop registered
[ 16.790326] io scheduler anticipatory registered
[ 16.790367] io scheduler deadline registered
[ 16.790421] io scheduler cfq registered (default)
[ 16.790474] PCI: VIA PCI bridge detected. Disabling DAC.
[ 16.790571] Boot video device is 0000:01:00.0
[ 16.790752] isapnp: Scanning for PnP cards...
[ 17.144170] isapnp: No Plug & Play device found
[ 17.173621] Real Time Clock Driver v1.12ac
[ 17.173803] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 17.173950] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.174192] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.174972] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.175318] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.176270] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 17.176588] input: Macintosh mouse button emulation as
/class/input/input0
[ 17.176722] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 17.177127] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.177173] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.177406] mice: PS/2 mouse device common for all mice
[ 17.177569] EISA: Probing bus 0 at eisa.0
[ 17.177631] Cannot allocate resource for EISA slot 4
[ 17.177672] Cannot allocate resource for EISA slot 5
[ 17.177726] EISA: Detected 0 cards.
[ 17.177979] TCP cubic registered
[ 17.178028] NET: Registered protocol family 1
[ 17.178089] Using IPI No-Shortcut mode
[ 17.178331] Magic number: 4:479:120
[ 17.179267] Freeing unused kernel memory: 364k freed
[ 17.218886] input: AT Translated Set 2 keyboard as /class/input/input1
[ 17.378005] AppArmor: AppArmor initialized<5>audit(1218013706.580:2):
type=1505 info="AppArmor initialized" pid=1175
[ 17.387572] fuse init (API version 7.8)
[ 17.394057] Failure registering capabilities with primary security
module.
[ 17.406574] ACPI: Fan [FAN] (on)
[ 17.411362] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 17.412962] ACPI: Thermal Zone [THRM] (39 C)
[ 18.013025] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 19 (level,
low) -> IRQ 16
[ 18.065966] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]
MMIO=[ea010000-ea0107ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 18.092469] usbcore: registered new interface driver usbfs
[ 18.092548] usbcore: registered new interface driver hub
[ 18.092617] usbcore: registered new device driver usb
[ 18.093534] USB Universal Host Controller Interface driver v3.0
[ 18.093981] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0,
using IRQ 21
[ 18.094027] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 18.094078] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI
21 (level, low) -> IRQ 17
[ 18.094204] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 18.094486] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 18.094569] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d800
[ 18.094758] usb usb1: configuration #1 chosen from 1 choice
[ 18.094831] hub 1-0:1.0: USB hub found
[ 18.094881] hub 1-0:1.0: 2 ports detected
[ 18.176150] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 18.176203] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 18.197556] ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [ALKB] -> GSI
21 (level, low) -> IRQ 17
[ 18.197686] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 18.197757] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[ 18.197830] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000dc00
[ 18.198003] usb usb2: configuration #1 chosen from 1 choice
[ 18.198082] hub 2-0:1.0: USB hub found
[ 18.198133] hub 2-0:1.0: 2 ports detected
[ 18.209380] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 18.209434] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 18.301377] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI
21 (level, low) -> IRQ 17
[ 18.301506] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 18.301584] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 3
[ 18.301656] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e000
[ 18.301829] usb usb3: configuration #1 chosen from 1 choice
[ 18.301903] hub 3-0:1.0: USB hub found
[ 18.301954] hub 3-0:1.0: 2 ports detected
[ 18.303374] Floppy drive(s): fd0 is 1.44M
[ 18.358892] FDC 0 is a post-1991 82077
[ 18.407690] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI
21 (level, low) -> IRQ 17
[ 18.407824] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 18.408188] ehci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 4
[ 18.408291] ehci_hcd 0000:00:10.3: irq 17, io mem 0xea011000
[ 18.437010] usb 1-1: new full speed USB device using uhci_hcd and
address 2
[ 18.437094] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 18.437655] usb usb4: configuration #1 chosen from 1 choice
[ 18.437858] hub 4-0:1.0: USB hub found
[ 18.437906] hub 4-0:1.0: 6 ports detected
[ 18.541397] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0,
using IRQ 23
[ 18.541451] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 18.541502] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI
23 (level, low) -> IRQ 18
[ 18.545637] eth0: VIA Rhine II at 0x1ec00, 00:0a:48:0b:5a:43, IRQ 18.
[ 18.546566] eth0: MII PHY found at address 1, status 0x786d
advertising 05e1 Link 45e1.
[ 18.548116] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 18.548470] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0,
using IRQ 20
[ 18.548516] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 18.548567] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI
20 (level, low) -> IRQ 19
[ 18.548692] VP_IDE: chipset revision 6
[ 18.548732] VP_IDE: not 100% native mode: will probe irqs later
[ 18.548784] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on
pci0000:00:11.1
[ 18.548859] ide0: BM-DMA at 0xe400-0xe407, BIOS settings:
hda:DMA, hdb:pio
[ 18.548977] ide1: BM-DMA at 0xe408-0xe40f, BIOS settings:
hdc:DMA, hdd:DMA
[ 18.549091] Probing IDE interface ide0...
[ 3.132000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.136000] Time: acpi_pm clocksource has been installed.
[ 3.516000] hda: WDC WD800BB-00CAA1, ATA DISK drive
[ 3.892000] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0010dc00003f4aba]
[ 4.188000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.204000] Probing IDE interface ide1...
[ 4.412000] usb 1-1: new full speed USB device using uhci_hcd and
address 3
[ 4.616000] usb 1-1: configuration #1 chosen from 1 choice
[ 4.860000] usb 1-2: new full speed USB device using uhci_hcd and
address 4
[ 5.020000] usb 1-2: configuration #1 chosen from 1 choice
[ 5.100000] hdc: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
[ 5.884000] hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
[ 5.940000] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.952000] SCSI subsystem initialized
[ 5.960000] libata version 2.21 loaded.
[ 5.972000] hda: max request size: 128KiB
[ 5.984000] hda: Host Protected Area detected.
[ 5.984000] current capacity is 150513984 sectors (77063 MB)
[ 5.984000] native capacity is 156301488 sectors (80026 MB)
[ 5.988000] hda: Host Protected Area disabled.
[ 5.988000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=65535/16/63, UDMA(100)
[ 5.988000] hda: cache flushes not supported
[ 5.988000] hda: hda1 hda2 hda3 hda4
[ 6.036000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 6.040000] Uniform CD-ROM driver Revision: 3.20
[ 6.040000] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 6.320000] Attempting manual resume
[ 6.320000] swsusp: Resume From Partition 3:3
[ 6.320000] PM: Checking swsusp image.
[ 6.320000] PM: Resume from disk failed.
[ 6.368000] kjournald starting. Commit interval 5 seconds
[ 6.368000] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.908000] Linux agpgart interface v0.102 (c) Dave Jones
[ 14.920000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 14.928000] agpgart: AGP aperture is 128M @ 0xd0000000
[ 14.940000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.948000] shpchp: Standard Hot Plug PCI Controller Driver version: 0..4
[ 16.036000] Linux video capture interface: v2.00
[ 16.076000]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c:
usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0
pid 0x2F11
[ 16.076000] usbcore: registered new interface driver usblp
[ 16.076000]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c:
v0.13: USB Printer Device Class driver
[ 16.200000]
/build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c:
USB SPCA5XX camera found. SONIX JPEG (sn9c1xx)
[ 16.204000] usbcore: registered new interface driver gspca
[ 16.204000]
/build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c:
gspca driver 01.00.12 registered
[ 16.348000] input: PC Speaker as /class/input/input2
[ 16.412000] irda_init()
[ 16.412000] NET: Registered protocol family 23
[ 16.612000] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers
v1:1.44
[ 16.612000] usbcore: registered new interface driver sn9c102
[ 16.856000] usbcore: registered new interface driver snd-usb-audio
[ 16.864000] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 16.868000] parport_pc 00:0b: reported by Plug and Play ACPI
[ 16.868000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 16.876000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0,
using IRQ 22
[ 16.876000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 16.876000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI
22 (level, low) -> IRQ 20
[ 16.876000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 17.812000] lp0: using parport0 (interrupt-driven).
[ 17.876000] Adding 690784k swap on /dev/hda3. Priority:-1 extents:1
across:690784k
[ 18.076000] EXT3 FS on hda2, internal journal
[ 95.620000] kjournald starting. Commit interval 5 seconds
[ 95.620000] EXT3 FS on hda4, internal journal
[ 95.620000] EXT3-fs: mounted filesystem with ordered data mode.
---
Liste de discussions de LinuxArverne
http://wiki.linuxarverne.org/listes_de_diffusion