[SOLVED]: [chrony-users] chronyc (ntpdata) and Reference ID like ntpq -p data -> refid

[Klaus Tachtler <klaus@xxxxxxxxxxxx>]

Hi,

I'm sorry for the noise:

"Reference ID    : D412016A ()"

D4 = 212
12 = 18
01 = 01
6A = 106

(It's the IP-Address in HEX blocks)
---> 212.18.1.106


Greetings
Klaus.

> Hi,
>
> under ntpd - following command "ntpq -4p" produces in my setup  
> follwoing output:
>
> # ntpq -4p
>         remote           refid      st t when poll reach   delay    
> offset  jitter
> ==============================================================================
> *ntp1.m-online.n 212.18.1.106     2 u  395 1024  377   25.932     
> 0.693   1.653
> +ntp2.m-online.n 212.18.1.106     2 u  871 1024  377   24.302     
> 0.440   0.549
>
> My question, with chronyc, is there a possibility to get the ip address like
> the refid under "ntpq -4p" too.
>
> With "chronyc ntpdata ntp1.m-online.net" - only a HEX -
> "Reference ID    : D412016A ()" will be shown, but NOT the ip address behind
> the "Reference ID    : D412016A ()" - like under "ntpq -4p".
>
>
> Thank you in advance!
> Klaus.
>
>
> --
>
> ---------------------------------------
> e-Mail  : klaus@xxxxxxxxxxxx
> Homepage: https://www.tachtler.net
> DokuWiki: https://dokuwiki.tachtler.net
> ---------------------------------------


--

---------------------------------------
e-Mail  : klaus@xxxxxxxxxxxx
Homepage: https://www.tachtler.net
DokuWiki: https://dokuwiki.tachtler.net
---------------------------------------

Attachment: bind0yptAu4Oh.bin
Description: =?utf-8?b?w5ZmZmVudGxpY2hlciBQR1AtU2NobMO8c3NlbA==?=