| Re: [chrony-users] GPS stratum |
[ Thread Index |
Date Index
| More chrony.tuxfamily.org/chrony-users Archives
]
Hi!
When I do chronyc sources the GPS is presented as a stratum 0 server,
shouldnt it say 1, or have I misunderstood something?
~ # chronyc sources
210 Number of sources = 1
MS Name/IP address Stratum Poll Reach LastRx Last sample
===============================================================================
#* GPS 0 4 377 21 -6811us[-9719us]
+/- 253ms
Mattias
On 2014-06-11 09:35, Bill Unruh wrote:
> Canada V6T 1Z1 | and Gravity | www.theory.physics.ubc.ca/
>
> On Wed, 11 Jun 2014, Mattias Walström wrote:
>
>> Hi!
>> According http://www.faqs.org/rfcs/rfc5905.html GPS shall have stratum 1
>> if it is connected as an external receiver, this is the case for me, I
>> use a GPS receiver connected with RS422.
>>
>> But is it possible to change stratum of the GPS in chrony, so it is
>> correct according to the RFC?
>
> Not sure what you mean. A hardware reference source (GPS, atomic
> clock, ...) is stratum 0
> . A computer such as
> yours, which takes its time from that reference source, is stratum 1.
> But only
> if that hardware source is really the sournce being used by chrony to
> discipline the time. Chrony does comply to the RFC. Perhaps if you
> told us your problem better
> advice could be given.
>
>>
>> Have not found anything about it in the manual.
>>
--
To unsubscribe email chrony-users-request@xxxxxxxxxxxxxxxxxxxx
with "unsubscribe" in the subject.
For help email chrony-users-request@xxxxxxxxxxxxxxxxxxxx
with "help" in the subject.
Trouble? Email listmaster@xxxxxxxxxxxxxxxxxxxx.