Re: [chrony-users] Discover when a time sync has been performed

[Ignacio Verona Ríos <ignacio.verona@xxxxxxxxxxx>]

Thanks again! Yes, I'm using 1.24 and now realized the log is there:

Jul  3 20:39:37 m2m-probe1 chronyd[2077]: System clock was stepped by 829.745 seconds

Jul  3 21:12:49 m2m-probe1 chronyd[2023]: System clock was stepped by 3057.778 seconds

Jul  3 21:34:59 m2m-probe1 chronyd[2108]: System clock was stepped by 21.122 seconds

Jul  3 22:46:03 m2m-probe1 chronyd[1983]: System clock was stepped by 1698.671 seconds

Jul  4 09:17:25 m2m-probe1 chronyd[2047]: System clock was stepped by 32109.587 seconds

Jul  4 10:27:34 m2m-probe1 chronyd[1992]: System clock was stepped by 36102.593 seconds

Jul  4 13:41:12 m2m-probe1 chronyd[2015]: System clock was stepped by 3942.919 seconds

Thank you very much! 

2013/7/4 Miroslav Lichvar <mlichvar@xxxxxxxxxx>

On Thu, Jul 04, 2013 at 04:32:04PM +0200, Ignacio Verona Ríos wrote:
> Hi Miroslav,
>
> thanks for your answer. It partially solves my question, but I'm not able
> to see the entry in the tracking log when makestep is applied. Last lines
> of the file look like this:

> > 2013-07-04 13:05:17 193.145.56.7     3     82.620     46.004 -2.830e-03
> >
> > 2013-07-04 13:05:21 193.145.56.7     3     82.127     43.920 -2.164e-03
> >
> > 2013-07-04 13:05:25 193.145.56.7     3     81.555     42.269 -1.921e-03
> >
> >
> >
> Should I expect some "Makestep OK" message? or it's a different state?

Not in the tracking log, but in the system log there should be a
"System clock was stepped by x seconds" message.