Re: [SliTaz] VDI?

[ Thread Index | Date Index | More lists.tuxfamily.org/slitaz Archives ]


I didn't try burning the Slitaz, i renamed to exe form, and run it on windows. Unless... Im supposed to burn the slitaz exe to the usb via rufus?

On Sun, May 10, 2020 at 11:50 AM Daryl Kuchay <daryl.kuchay@xxxxxxxxxx> wrote:
Only guessing at what part you are stuck on but in my experience with uefi hardware was that unless I enabled a setting in the bios known as legacy boot the uefi wont see it and will blow past in in boot sequence. That is one option. The other is to make a uefi boot entry in the bios for the usb stick. 

I am guessing you are using Slitaz 5 rolling? It is a efi capable iso from what I hear but I am not all that familiar with installing. If there is to be a reboot action and to boot to the usb for the install it may be worth enabling legacy boot in bios or the other path of making a boot entry for it in uefi potion of bios. 

Not sure if this helps....

Sent from my iPad

On May 10, 2020, at 2:45 PM, Phoenix Soul <phoenixlight101@xxxxxxxxx> wrote:


Like the slitaz will not find the USB, even though I remounted it.

On Sun, May 10, 2020 at 11:44 AM Phoenix Soul <phoenixlight101@xxxxxxxxx> wrote:
Um, my computer uses UEFI BIOS.

On Sun, May 10, 2020 at 10:46 AM Daryl Kuchay <daryl.kuchay@xxxxxxxxxx> wrote:
I have no experience with slitaz in exe form but I am guessing you renamed iso to exe and when rebooting the usb is not getting recognized? 

Is your computer efi based?

Sent from my iPad

On May 10, 2020, at 12:01 PM, Phoenix Soul <phoenixlight101@xxxxxxxxx> wrote:


Hello?



--
From, Warrick



--
From, Warrick



--
From, Warrick



Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/