[ Thread Index |
Date Index
| More lists.tuxfamily.org/slitaz Archives
]
I read the post of Christophe to release RC1 on Thursday
please before releasing RC1
1) update the kernel - my kernel-config has an error - see here
http://forum.slitaz.org/topic/cookingrolling-unable-to-run-a-full-installation
it should be modified - I suggest to this config
1404 CONFIG_SATA_SIL24=y
1405 CONFIG_ATA_SFF=y
1406
1407 #
1408 # SFF controllers with custom DMA interface
1409 #
1410 CONFIG_PDC_ADMA=y
1411 CONFIG_SATA_QSTOR=y
1412 CONFIG_SATA_SX4=y
1413 CONFIG_ATA_BMDMA=y
1414
1415 #
1416 # SATA SFF controllers with BMDMA
1417 #
1418 CONFIG_ATA_PIIX=y
1419 CONFIG_SATA_MV=y
1420 CONFIG_SATA_NV=y
1421 CONFIG_SATA_PROMISE=y
1422 CONFIG_SATA_SIL=y
1423 CONFIG_SATA_SIS=y
1424 CONFIG_SATA_SVW=y
1425 CONFIG_SATA_ULI=y
1426 CONFIG_SATA_VIA=y
1427 CONFIG_SATA_VITESSE=y
1428
1429 #
1430 # PATA SFF controllers with BMDMA
1431 #
1432 CONFIG_PATA_ALI=y
1433 CONFIG_PATA_AMD=y
1434 CONFIG_PATA_ARTOP=y
1435 CONFIG_PATA_ATIIXP=y
1436 CONFIG_PATA_ATP867X=y
1437 CONFIG_PATA_CMD64X=m
1438 CONFIG_PATA_CS5520=m
1439 CONFIG_PATA_CS5530=m
1440 CONFIG_PATA_CS5535=m
1441 CONFIG_PATA_CS5536=m
1442 CONFIG_PATA_CYPRESS=m
1443 CONFIG_PATA_EFAR=m
1444 CONFIG_PATA_HPT366=m
1445 CONFIG_PATA_HPT37X=m
1446 CONFIG_PATA_HPT3X2N=m
1447 CONFIG_PATA_HPT3X3=m
1448 # CONFIG_PATA_HPT3X3_DMA is not set
1449 CONFIG_PATA_IT8213=m
1450 CONFIG_PATA_IT821X=y
1451 CONFIG_PATA_JMICRON=y
1452 CONFIG_PATA_MARVELL=y
1453 CONFIG_PATA_NETCELL=m
1454 CONFIG_PATA_NINJA32=m
1455 CONFIG_PATA_NS87415=m
1456 CONFIG_PATA_OLDPIIX=m
1457 CONFIG_PATA_OPTIDMA=m
1458 CONFIG_PATA_PDC2027X=m
1459 CONFIG_PATA_PDC_OLD=m
1460 # CONFIG_PATA_RADISYS is not set
1461 CONFIG_PATA_RDC=m
1462 # CONFIG_PATA_SC1200 is not set
1463 CONFIG_PATA_SCH=m
1464 CONFIG_PATA_SERVERWORKS=m
1465 CONFIG_PATA_SIL680=m
1466 CONFIG_PATA_SIS=y
1467 CONFIG_PATA_TOSHIBA=y
1468 CONFIG_PATA_TRIFLEX=m
1469 CONFIG_PATA_VIA=y
1470 CONFIG_PATA_WINBOND=m
1471
1472 #
1473 # PIO-only SFF controllers
1474 #
1475 CONFIG_PATA_CMD640_PCI=m
1476 CONFIG_PATA_ISAPNP=y
1477 CONFIG_PATA_MPIIX=y
1478 CONFIG_PATA_NS87410=m
1479 CONFIG_PATA_OPTI=m
1480 CONFIG_PATA_PCMCIA=m
1481 CONFIG_PATA_QDI=m
1482 # CONFIG_PATA_RZ1000=m
1483 CONFIG_PATA_WINBOND_VLB=m
1484
1485 #
1486 # Generic fallback / legacy drivers
1487 #
1488 CONFIG_PATA_ACPI=y
1489 CONFIG_ATA_GENERIC=y
2) automount with udisks
at the moment nothing is mounted on the life CD
I propose to make a /etc/polkit-1/localauthority/50-local.d/55-storage.pkla
with the following lines into the file
[Storage Permissions]
Identity=unix-user:tux
Identity=unix-group:plugdev
Action=org.freedesktop.udisks2.filesystem-mount;org.freedesktop.udisks.drive-eject;org.freedesktop.udisks2.drive-detach;org.freedesktop.udisks2.luks-unlock;org.freedesktop.udisks2.inhibit-polling;org.freedesktop.udisks2.drive-set-spindown
ResultAny=yes
ResultActive=yes
ResultInactive=no
and add tux to plugdev group
there is a problem with CD-Roms - so something might be wrong in the Action, but also with
Action=org.freedesktop.udisks2.*
it does not work
3) is there any possibility to get ash_history - I really hate this, but this could be later...
Thomas
--
posteo <kult-ex@xxxxxxxxx>
--
SliTaz GNU/Linux Mailing list - http://www.slitaz.org/