Re: Rolling 20120320 (Xorg fixe)

[Paweł Górski <oxym85@xxxxx>]

Hi,

This is the firsc RC iso I've tested and I'm impressed.
However I have noticed some issues:
- when run under virtual machine it failed to boot with 256MB of RAM (when increased to 512 worked great)
- when booted live USB (prepared with Unetbootin) I had to press ctrl+alt+F7 in order to see X
- when selected "pl2" keybord layout ("pl2" makes a little sense, because "pl" is standard Polish layout) keybord was not working at all under X

I'm using laptop with AMD A6-3400 processor with integrated Radeon 6520 graphics.

Regards,
Pawel


----- Wiadomość oryginalna -----
> On Fri, 2012-03-23 at 14:17 +0100, Christophe Lincoln wrote:
> > Hi,
> > 
> > So here is a new ISO with fix in Tazbox. It works better for me, xorg
> > configs are created and DRI is enabled for my Intel card. If you could
> > try it ou without any boot options:
> > 
> > http://people.slitaz.org/~pankso/iso/slitaz-rolling-core.iso
> > http://people.slitaz.org/~pankso/iso/slitaz-rolling-core.md5
> > http://people.slitaz.org/~pankso/iso/slitaz-rolling-core.log
> > 
> > Regards,
> > - Christophe
> > 
> 
> Hi Christophe, 
> 
> I'm still getting problems with my nvidia card. Boot.log and
> xorg.configure.log attached:
> 
> Switching / to tmpfs[ OK ]
> Processing /etc/init.d/rcS...
> Mounting proc filesystem...[ OK ]
> Remounting rootfs read/write...
> Starting udev daemon...
> Udevadm requesting events from the Kernel...
> Udevadm waiting for the event queue to finish...
> Using Udev for hotplugging...
> Mounting filesystems in fstab...
> Searching for early boot options...[ OK ]
> Cleaning up the system...[ OK ]
> Setting up tmp X11 and ICE unix dir...[ OK ]
> Creating symlink : /dev/cdrom...[ OK ]
> Adding /dev/cdrom   to fstab...[ OK ]
> Chmoding cdrom device...[ OK ]
> Mounting /proc/bus/usb filesystem...[ OK ]
> Starting system log deamon: syslogd...[ OK ]
> Starting kernel log daemon: klogd...[ OK ]
> Detecting PCI devices Kernel modules...
> * Loaded module:     intel_agp
> * Loaded module:     snd_hda_intel
> * Loaded module:     iwlagn
> * Loaded module:     yenta_socket
> Detecting USB devices Kernel modules...
> Requesting events from the Kernel...[ OK ]
> Executing all initialization scripts...
> Configuring user and group: tux...[ OK ]
> Parsing kernel cmdline for SliTaz live options... 
> Swap memory detected on: /dev/sda6
> Activating swap memory...
> Setting hostname...[ OK ]
> Configuring loopback...[ OK ]
> Starting udhcpc client on: eth0...
> udhcpc (v1.18.4) started
> Sending discover...
> Sending discover...
> Sending discover...
> Sending select for 192.168.1.64...
> Lease of 192.168.1.64 obtained, lease time 86400
> deleting routers
> route: SIOCDELRT: No such process
> adding dns 192.168.1.254
> Setting default mixer volumes... Done
> Starting TazPanel web server on port 82...[ OK ]
> Checking if /etc/locale.conf exists... 
> Starting TazBox configuration...
> XIO:   fatal IO error 11 (Resource temporarily unavailable) on X server
> ":1"
>             after 3255 requests (3254 known processed) with 0 events
> remaining.
> Keymap configuration: uk
> Loading /usr/share/kbd/keymaps/i386/qwerty/uk.map.gz
> Configuring Xorg...
> Starting local startup commands... 
> Starting all daemons specified in /etc/rcS.conf...
> Starting message bus daemon: DBUS... [ OK ]
> Starting Hardware Abstraction Layer: HAL... [ OK ]
> Starting slim login manager: Slim... [ OK ]
> Setting up kernel security rules... [ OK ]
> Iptables rules are disabled in: /etc/firewall.conf... 
> Starting httpd deamon: httpd... [ OK ]
> 
>                H               H               H               H               H               H             
> H               H               H c]R Welcome to your box. SliTaz boot
> time: 15s
> 
> ============================================================================
> 
> _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
> _XSERVTransOpen: transport open failed for inet6/slitaz:1
> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
> _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
> _XSERVTransMakeAllCOTSServerListeners: server already running
> 
> Fatal server error:
> Cannot establish any listening sockets - Make sure an X server isn't
> already running
> 
> Please consult the The X.Org Foundation support 
>      at http://wiki.x.org
>   for help. 
> Please also check the log file at "/var/log/Xorg.1.log" for additional
> information.
> 
> sed: /root/xorg.conf.new: No such file or directory
> sed: /root/xorg.conf.new: No such file or directory
> sed: /root/xorg.conf.new: No such file or directory
> sed: /root/xorg.conf.new: No such file or directory
> sed: /root/xorg.conf.new: No such file or directory
> sed: /root/xorg.conf.new: No such file or directory
> rm: can't remove '/root/xorg.conf.new': No such file or directory
> 
> Regards
> 
> Paul
> 
> 
> 
> 
> -- 
> SliTaz GNU/Linux Mailing list - http://www.slitaz.org/
> 


-- 
SliTaz GNU/Linux Mailing list - http://www.slitaz.org/