| Re: 4in1 -> tazlito gen-distro -> kernel errors |
[ Thread Index |
Date Index
| More lists.tuxfamily.org/slitaz Archives
]
Hi,
Le Saturday 29 January 2011 17:08:54 Ikem Krueger, vous avez écrit :
> > 2011/1/29 Stephane <crob2607@xxxxxxx>:
> > I get troubles rebuilding [slitaz-cooking-4in1.]iso.
> >
> > I use this iso to boot on in vmware,... initilisation starts and
> > [<c150172e>] ? kernel_init+0x0/0x18e
> > [<c1003676>] kernel_thread_helper+0x6/0x10
> > System frozen.
> >
...
> > - It boots correctly, but no disk is found:
> > # fdisk -l
> > <empty_reply>
> > though SystemRescueCD (http://www.sysresccd.org) find the hard drive.
> > What am I doing wrong?
>
> I guess the driver for the PATA/SATA controller isn't loaded. Boot
> into SystemRescueCD and do a "lsmod". Post the output here.
SysRescCD lsmod:
============================
Module Size Used by
ipv6 196265 10
ppdev 5566 0
parport_pc 14597 0
floppy 39289 0
parport 20697 2 ppdev,parport_pc
vmware_balloon 4306 0
pcspkr 1094 0
i2c_piix4 9397 0
i2c_core 14937 1 i2c_piix4
raid10 16638 0
raid456 48946 0
async_raid6_recov 3835 1 raid456
async_pq 2860 2 raid456,async_raid6_recov
raid6_pq 77458 2 async_raid6_recov,async_pq
async_xor 2159 3 raid456,async_raid6_recov,async_pq
xor 11413 1 async_xor
async_memcpy 1240 2 raid456,async_raid6_recov
async_tx 1546 5
raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 15614 0
raid0 6618 0
multipath 4326 0
linear 2582 0
pcnet32 22045 0
BusLogic 55077 0
mii 2725 1 pcnet32
============================
SliTaz lsmod
============================
Module Size Used by Not tainted
parport_pc 16017 0
floppy 41085 0
parport 20983 1 parport_pc
snd_ens1371 13610 1
gameport 5689 1 snd_ens1371
snd_rawmidi 12356 1 snd_ens1371
snd_seq_device 3757 1 snd_rawmidi
snd_ac97_codec 77963 1 snd_ens1371
ac97_bus 718 1 snd_ac97_codec
snd_pcm 43729 2 snd_ens1371,snd_ac97_codec
snd_timer 12487 1 snd_pcm
snd 32308 8
snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
soundcore 3357 1 snd
snd_page_alloc 4841 1 snd_pcm
============================
And lshw
============================
*-scsi
description: SCSI storage controller
product: BT-946C (BA80C30) [MultiMaster 10]
vendor: BusLogic
physical id: 10
bus info: pci@0000:00:10.0
logical name: scsi2
version: 01
width: 32 bits
clock: 33MHz
capabilities: scsi bus_master scsi-host
configuration: driver=BusLogic latency=64 maxlatency=255 mingnt=6
resources: ioport:1440(size=32) memory:e8800000-e880001f
memory:20018000-2001bfff
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
size: 4GiB (4294MB)
============================
Using another vmware, I can see the hard drive.
The first one (buslogic) was the default choice a few years ago (hard drive
choice) when I created this vmware.
> Is the system booting with Slitaz 3.0, Cooking, any other flavor?
4in1 iso is cooking based.
http://mirror.slitaz.org/iso/cooking/flavors/slitaz-cooking-4in1.md5
slitaz-cooking-4in1.iso 2010-Nov-13 13:11:35 31.0M application/octet-stream
$ cat /etc/slitaz-release
cooking
$
Using the second vmware... the one with visible hard drive;), I did the test
again:
tazlito clean-distro
tazlito get-flavor core-4in1
tazlito extract-flavor core-4in1
tazlito gen-distro
The iso I get boots correctly on first and second vmware.
But HD isn't visible in first one.
Regards.
--
Stephane Boireau
http://leszrofs.blogspot.com/2008/09/au-ministre.html
---
SliTaz GNU/Linux Mailing list - http://www.slitaz.org/