[qet] Fw: Enquiry on dxf conversion into qed pls |
[ Thread Index | Date Index | More lists.tuxfamily.org/qet Archives ]
Dear Sir/Madam,
I would like to convert the attached .dxf file into .qet file using the DXFtoQET.exe, so that I can load it on QElectroTech.
However, I'm not succeeding and I'm attaching the logfile.
Can you kindly tell me how I can convert .dxf file to .qet file please?
Thank you
Johann
|
Attachment:
RA2A48D25_ CARLO_GAVAZZI.dxf
Description: RA2A48D25_ CARLO_GAVAZZI.dxf
22:43:52 -> Open file ============================================================================ ra2a48d25 carlogavazzi ============================================================================ read file ra2a48d25 carlogavazzi into program check file for correct type of file file of type DXF file of type ASCII DXF ============================================================================ 22:43:57=> Start deleting ../ra2a48d25 carlogavazzi.db3 ============================================================================ 22:43:57=> Start loading dxfra2a48d25 carlogavazzi file into DB tables Creating DB : ra2a48d25 carlogavazzi ============================================================================ create : ../ra2a48d25 carlogavazzi.db3 creating tables ============================================================================ total characters : 369464 total lines : 32681 ============================================================================ index header : 3 index classes : 1277 index tables : 1443 index blocks : 4555 index entities : 4683 index objects : 21057 index thumbnailimage : -1 ============================================================================ calculating section lengths ============================================================================ header lenght : 1274 classes lenght : 166 tables lenght : 3112 blocks lenght : 128 entities lenght : 16374 objects lenght : 11624 thumbnailimage lenght : 32682 ============================================================================ Splitting HEADER list header items : 291 Splitting HEADER Splitting CLASSES list : disabled Splitting TABLES list 22:44:01 tables items : 106 Splitting tables 106 Splitting BLOCKS list blocks items : 12 Splitting BLOCKS Splitting ENTITIES list entities items : 1038 Splitting ENTITIES Splitting ENTITIES Splitting OBJECTS list : disabled no THUMBNAILIMAGE list to split : disabled End loading into db 22:44:21 ============================================================================ ============================================================================ 22:44:23 - Create file : ../ra2a48d25 carlogavazzi.elmt ============================================================================ ============================================================================ DXF_Result : 0 DXF_Result Begin : 0 DXF_Result Entitie: 0 DXF_Result Entitie Line: 0 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 0 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 ============================================================================ 22:44:23 - Start creating elmt : 1038 ============================================================================ Open : ../ra2a48d25 carlogavazzi.db3 Get dxf Header information Get dxf Layer information325 Tables records processed ============================================================================ Layers info loaded ============================================================================ 325 Tables records processed ============================================================================ Layers info loaded ============================================================================ Creating header of ELMT file Add UUID names, kindinformation, information ... ELMT file ============================================================================ DXF_Result : 0 DXF_Result Begin : 584 DXF_Result Entitie: 0 DXF_Result Entitie Line: 0 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 0 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 Add DXF entities to ELMT file DXF file converted ENTITIES ============================================================================ 22:44:23 ============================================================================ DXF_Result : 0 DXF_Result Begin : 584 DXF_Result Entitie: 0 DXF_Result Entitie Line: 0 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 0 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 ============================================================================ DXF_Result : 0 DXF_Result Begin : 584 DXF_Result Entitie: 1169 DXF_Result Entitie Line: 56916 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 29962 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 Records ENTITIE passed : 879 ============================================================================22:44:31 - Closed file : ../ra2a48d25 carlogavazzi.elmt============================================================================ ============================================================================22:44:31 - Closed file : ../ra2a48d25 carlogavazzi.elmt============================================================================ ============================================================================ 22:45:01 - Create file : ../ra2a48d25 carlogavazzi.elmt ============================================================================ ============================================================================ 22:45:01 - Create file : ../ra2a48d25 carlogavazzi.elmt ============================================================================ ============================================================================ DXF_Result : 0 DXF_Result Begin : 0 DXF_Result Entitie: 0 DXF_Result Entitie Line: 0 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 0 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 ============================================================================ DXF_Result : 0 DXF_Result Begin : 0 DXF_Result Entitie: 0 DXF_Result Entitie Line: 0 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 0 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 ============================================================================ 22:45:01 - Start creating elmt : 1038 ============================================================================ ============================================================================ 22:45:01 - Start creating elmt : 1038 ============================================================================ Open : ../ra2a48d25 carlogavazzi.db3 Get dxf Header information Open : ../ra2a48d25 carlogavazzi.db3 Get dxf Header information Get dxf Layer information Get dxf Layer information325 Tables records processed ============================================================================ Layers info loaded ============================================================================ 325 Tables records processed ============================================================================ Layers info loaded ============================================================================ Creating header of ELMT file Creating header of ELMT file Add UUID names, kindinformation, information ... ELMT file ============================================================================ DXF_Result : 0 DXF_Result Begin : 584 DXF_Result Entitie: 0 DXF_Result Entitie Line: 0 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 0 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 ============================================================================ DXF_Result : 0 DXF_Result Begin : 584 DXF_Result Entitie: 0 DXF_Result Entitie Line: 0 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 0 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 Add DXF entities to ELMT file Add DXF entities to ELMT file DXF file converted ENTITIES ============================================================================ 22:45:02 ============================================================================ DXF_Result : 0 DXF_Result Begin : 584 DXF_Result Entitie: 0 DXF_Result Entitie Line: 0 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 0 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 ============================================================================ DXF_Result : 0 DXF_Result Begin : 584 DXF_Result Entitie: 1169 DXF_Result Entitie Line: 56916 DXF_Result Entitie Polyline: 0 DXF_Result Entitie Lwpolyline: 0 DXF_Result Entitie Spline: 29962 DXF_Result Entitie Solid: 0 DXF_Result Entitie Hatch: 0 DXF_Result Block: 0 DXF_Result Block 2: 0 DXF_Result Einde : 0 Records ENTITIE passed : 879 ============================================================================22:45:09 - Closed file : ../ra2a48d25 carlogavazzi.elmt============================================================================ ============================================================================22:45:09 - Closed file : ../ra2a48d25 carlogavazzi.elmt============================================================================ ============================================================================22:45:09 - Closed file : ../ra2a48d25 carlogavazzi.elmt============================================================================
Mail converted by MHonArc 2.6.19+ | http://listengine.tuxfamily.org/ |