| [linux-oxnas] Re: [PATCH] net: stmmac: Add OXNAS Glue Driver |
[ Thread Index |
Date Index
| More lists.tuxfamily.org/linux-oxnas Archives
]
On Fri, Oct 21, 2016 at 10:44:45AM +0200, Neil Armstrong wrote:
> Add Synopsys Designware MAC Glue layer for the Oxford Semiconductor OX820.
>
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/net/oxnas-dwmac.txt | 44 +++++
It's preferred that bindings are a separate patch.
> drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 ++
> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
> drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c | 219 +++++++++++++++++++++
> 4 files changed, 275 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/oxnas-dwmac.txt
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
>
> Changes since RFC at https://patchwork.kernel.org/patch/9387257 :
> - Drop init/exit callbacks
> - Implement proper remove and PM callback
> - Call init from probe
> - Disable/Unprepare clock if stmmac probe fails
>
> diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
> new file mode 100644
> index 0000000..5d2696c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
> @@ -0,0 +1,44 @@
> +* Oxford Semiconductor OXNAS DWMAC Ethernet controller
> +
> +The device inherits all the properties of the dwmac/stmmac devices
> +described in the file stmmac.txt in the current directory with the
> +following changes.
> +
> +Required properties on all platforms:
> +
> +- compatible: Depending on the platform this should be one of:
> + - "oxsemi,ox820-dwmac"
> + Additionally "snps,dwmac" and any applicable more
> + detailed version number described in net/stmmac.txt
> + should be used.
You should be explicit what version applies to ox820. "snps,dwmac"
should probably be deprecated IMO. There are so many variations of DW
h/w.
> +
> +- reg: The first register range should be the one of the DWMAC
> + controller.
This is worded like there's a 2nd range?
> +
> +- clocks: Should contain phandles to the following clocks
> +- clock-names: Should contain the following:
> + - "stmmaceth" - see stmmac.txt
> + - "gmac" - peripheral gate clock
> +
> +- oxsemi,sys-ctrl: a phandle to the system controller syscon node
> +
> +Example :
> +
> +etha: ethernet@40400000 {
> + compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
> + reg = <0x40400000 0x2000>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq", "eth_wake_irq";
> + mac-address = [000000000000]; /* Filled in by U-Boot */
> + phy-mode = "rgmii";
> +
> + clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
> + clock-names = "gmac", "stmmaceth";
> + resets = <&reset RESET_MAC>;
> +
> + /* Regmap for sys registers */
> + oxsemi,sys-ctrl = <&sys>;
> +
> + status = "disabled";
> +};