Re: [hatari-devel] Linux started to init in Hatari |
[ Thread Index | Date Index | More lists.tuxfamily.org/hatari-devel Archives ]
Hi, Finally got Linux booting successfully to shell. I'm now using Geert's kernel, but I think the main issue was just getting a working kernel configuration. There was something causing oopses in the old one. I also never got ramfs booting working correctly, but booting with IDE rootfs i.e. what was working on real device, works now. [1] Attached are working config, and bootlog from where you can see Hatari options. IDE content was just busybox in bin/, made into a FAT file system with atari-hd-image script coming with Hatari, so it wasn't very useful. :-) After I've tested few extra things and updated/cleaned the docs a bit, I'll push the updated patches in, if there are no further comments / objections about them. [1] Trying to boot with that same FAT rootfs that works through IDE, from a floppy, never finished. I just got warnings from m68k kernel soft-watchdog every few minutes that things were (still) stuck somewhere. -> I think kernel itself is buggy in some configs. - Eero On 3/21/19 1:35 AM, Eero Tamminen wrote:
I got Linux starting enough that it showed logs also in Atari screen, not just debug console, and it tried running init, at which point it got NULL pointer Oops. Log attached. I got this by building few days old Linux Git from upstream: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Using the attached kernel config. (Maybe the Debian 3.6 & 4.9 binary kernels I tried earlier enabled some extra HW which probing disagrees with Hatari.) This new kernel build some weird extra objects for which there were no config options (e.g. some ARM omap stuff), but I didn't check whether linker discarded those from final binary or not. I'll probably try Geert's (m68k arch maintainer) kernel next:https://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git/log/?h=m68k-v5.0And try to get newer m68k initrd content.
$ hatari --natfeats yes --trace nvram,scsi_cmd --log-level todo --machine falcon --dsp dummy --mmu on --fpu 68882 -c lilo.cfg -s 14 --ttram 64 --addr24 off --ide-master 16mb-linux.img --lilo 'debug=nfcon console=tty root=/dev/hda1 init=/bin/sh' INFO : Hatari v2.2.1, compiled on: Mar 20 2019, 23:52:06 INFO : Mounting IDE hard drive image 16mb-linux.img LILO: uncompressing 'vmlinux' LILO: uncompressed length: 3989484 bytes LILO: kexec_elf->e_phnum = 0x00000002 LILO: kernel_phdrs[0].p_vaddr = 0x00000000 LILO: kernel_phdrs[0].p_offset = 0x00000000 LILO: kernel_phdrs[0].p_filesz = 0x002ed040 LILO: kernel_phdrs[0].p_memsz = 0x00307ab8 LILO: kernel_phdrs[1].p_vaddr = 0x00308000 LILO: kernel_phdrs[1].p_offset = 0x002ee000 LILO: kernel_phdrs[1].p_filesz = 0x0001c310 LILO: kernel_phdrs[1].p_memsz = 0x0001d000 LILO: min_addr = 0x00000000 LILO: max_addr = 0x00325000 LILO: new linker: LILO: kernel_phdrs[0].p_vaddr = 0x00000000 LILO: kernel_phdrs[0].p_offset = 0x00000000 LILO: kernel_phdrs[0].p_filesz = 0x002ed040 LILO: kernel_phdrs[0].p_memsz = 0x00307ab8 LILO: modified to: LILO: kernel_phdrs[0].p_vaddr = 0x00001000 LILO: kernel_phdrs[0].p_offset = 0x00001000 LILO: kernel_phdrs[0].p_filesz = 0x002ec040 LILO: kernel_phdrs[0].p_memsz = 0x00306ab8 LILO: kernel_size = 3293184 LILO: 14336 kB ST-RAM, 65536 kB TT-RAM LILO: copying 2 segments to ST-RAM... LILO: Copied segment 0: 0x00001000 + 0x002ec040 to 0x00001000 LILO: Copied segment 1: 0x002ee000 + 0x0001c310 to 0x00308000 LILO: No ramdisk LILO: config_file command line: video=atafb:sthigh debug=nfcon console=tty root=/dev/hda1 init=/bin/sh LILO: kernel command line: video=atafb:sthigh debug=nfcon console=tty root=/dev/hda1 init=/bin/sh BOOT_IMAGE=vmlinux LILO: bootinfo at 0x00325000 LILO: bi_union.record[ 0] = 0x00010008 LILO: bi_union.record[ 1] = 0x00000002 LILO: bi_union.record[ 2] = 0x00020008 LILO: bi_union.record[ 3] = 0x00000002 LILO: bi_union.record[ 4] = 0x00030008 LILO: bi_union.record[ 5] = 0x00000002 LILO: bi_union.record[ 6] = 0x00040008 LILO: bi_union.record[ 7] = 0x00000002 LILO: bi_union.record[ 8] = 0x0005000c LILO: bi_union.record[ 9] = 0x00000000 LILO: bi_union.record[10] = 0x00e00000 LILO: bi_union.record[11] = 0x0005000c LILO: bi_union.record[12] = 0x01000000 LILO: bi_union.record[13] = 0x04000000 LILO: bi_union.record[14] = 0x00070074 LILO: bi_union.record[15] = 0x76696465 LILO: OK NVRAM: loaded from '~/.config/hatari/hatari.nvram' Linux version 5.0.0hatari-ge7c682ba6 (hatari@pc) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #3 Sat Mar 23 00:44:38 EET 2019 INFO : OS clock ticks / second: 100 printk: console [nfcon0] enabled Atari hardware found: VIDEL STDMA-SCSI ST_MFP YM2149 PCM CODEC DSP56K SCC ANALOG_JOY BLITTER IDE TT_CLK FDC_SPEED On node 0 totalpages: 3584 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3584 pages, LIFO batch:0 On node 1 totalpages: 16384 DMA zone: 144 pages used for memmap DMA zone: 0 pages reserved DMA zone: 16384 pages, LIFO batch:3 NatFeats found (Hatari, 1.0) pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 2 zonelists, mobility grouping on. Total pages: 19792 Kernel command line: video=atafb:sthigh debug=nfcon console=tty root=/dev/hda1 init=/bin/sh BOOT_IMAGE=vmlinux Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 74768K/79872K available (2299K kernel code, 240K rwdata, 548K rodata, 116K init, 106K bss, 5104K reserved, 0K cma-reserved) SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8 NR_IRQS: 141 Console: colour dummy device 80x25 Linux version 5.0.0hatari-ge7c682ba6 (eero@sonata) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #3 Sat Mar 23 00:44:38 EET 2019 printk: console [nfcon0] enabled Atari hardware found: VIDEL STDMA-SCSI ST_MFP YM2149 PCM CODEC DSP56K SCC ANALOG_JOY BLITTER IDE TT_CLK FDC_SPEED On node 0 totalpages: 3584 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3584 pages, LIFO batch:0 On node 1 totalpages: 16384 DMA zone: 144 pages used for memmap DMA zone: 0 pages reserved DMA zone: 16384 pages, LIFO batch:3 NatFeats found (Hatari, 1.0) pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 2 zonelists, mobility grouping on. Total pages: 19792 Kernel command line: video=atafb:sthigh debug=nfcon console=tty root=/dev/hda1 init=/bin/sh BOOT_IMAGE=vmlinux Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 74768K/79872K available (2299K kernel code, 240K rwdata, 548K rodata, 116K init, 106K bss, 5104K reserved, 0K cma-reserved) SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8 NR_IRQS: 141 Console: colour dummy device 80x25 printk: console [tty0] enabled Calibrating delay loop... 4.35 BogoMIPS (lpj=21760) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc+0x140/0x166 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes) NET: Registered protocol family 16 random: fast init done SCSI subsystem initialized libata version 3.00 loaded. NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 workingset: timestamp_bits=27 max_order=15 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher romfs: ROMFS MTD (C) 2007 Red Hat, Inc. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler mq-deadline registered atafb_init: start atafb_init: initializing Falcon hw atafb: screen_base (ptrval) phys_screen_base 3dc000 screen_len 69632 Determined 640x400, depth 1 virtual 640x870 Console: switching to mono frame buffer device 80x25 fb0: frame buffer device, using 68K of video memory lp: driver loaded but no devices found Non-volatile memory driver v1.3 parport0: Atari built-in port using irq parport0: fix this legacy no-device port driver! lp0: using parport0 (interrupt-driven). Atari floppy driver: max. HD, track buffering Probing floppy drive(s): fd0 fd1 brd: module loaded loop: module loaded dummy-irq: no IRQ given. Use irq=N Uniform Multi-Platform E-IDE driver ide: Falcon IDE controller Probing IDE interface ide0... hda: Hatari IDE disk 16M, ATA DISK drive IDE: CMD to non-existant IDE device #1! IDE: CMD to non-existant IDE device #1! ide0 at 0xfff00000 on irq 15 (serialized) ide-gd driver 1.18 hda: max request size: 1024KiB hda: 32769 sectors (16 MB) w/256KiB Cache, CHS=32/255/63 hda: cache flushes supported hda: hda1 NVRAM: read data at 14 = 0 ($00) NVRAM: read data at 15 = 0 ($00) NVRAM: read data at 16 = 0 ($00) NVRAM: read data at 17 = 0 ($00) NVRAM: read data at 18 = 0 ($00) NVRAM: read data at 19 = 0 ($00) NVRAM: read data at 20 = 0 ($00) NVRAM: read data at 21 = 0 ($00) NVRAM: read data at 22 = 17 ($11) NVRAM: read data at 23 = 46 ($2e) NVRAM: read data at 24 = 32 ($20) NVRAM: read data at 25 = 1 ($01) NVRAM: read data at 26 = 255 ($ff) NVRAM: read data at 27 = 0 ($00) NVRAM: read data at 28 = 1 ($01) NVRAM: read data at 29 = 42 ($2a) NVRAM: read data at 30 = 135 ($87) NVRAM: read data at 31 = 0 ($00) NVRAM: read data at 32 = 0 ($00) NVRAM: read data at 33 = 0 ($00) NVRAM: read data at 34 = 0 ($00) NVRAM: read data at 35 = 0 ($00) NVRAM: read data at 36 = 0 ($00) NVRAM: read data at 37 = 0 ($00) NVRAM: read data at 38 = 0 ($00) NVRAM: read data at 39 = 0 ($00) NVRAM: read data at 40 = 0 ($00) NVRAM: read data at 41 = 0 ($00) NVRAM: read data at 42 = 0 ($00) NVRAM: read data at 43 = 0 ($00) NVRAM: read data at 44 = 0 ($00) NVRAM: read data at 45 = 0 ($00) NVRAM: read data at 46 = 0 ($00) NVRAM: read data at 47 = 0 ($00) NVRAM: read data at 48 = 0 ($00) NVRAM: read data at 49 = 0 ($00) NVRAM: read data at 50 = 0 ($00) NVRAM: read data at 51 = 0 ($00) NVRAM: read data at 52 = 0 ($00) NVRAM: read data at 53 = 0 ($00) NVRAM: read data at 54 = 0 ($00) NVRAM: read data at 55 = 0 ($00) NVRAM: read data at 56 = 0 ($00) NVRAM: read data at 57 = 0 ($00) NVRAM: read data at 58 = 0 ($00) NVRAM: read data at 59 = 0 ($00) NVRAM: read data at 60 = 0 ($00) NVRAM: read data at 61 = 0 ($00) NVRAM: read data at 62 = 238 ($ee) NVRAM: read data at 63 = 17 ($11) NVRAM: read data at 30 = 135 ($87) scsi host0: Atari native SCSI, irq 15, io_port 0x0, base 0x0, can_queue 1, cmd_per_lun 2, sg_tablesize 0, this_id 7, flags { } pata_falcon: Atari Falcon PATA controller pata_falcon: resources busy blk_queue_max_segments: set to minimum 1 NET3 PLIP version 2.4-parport gniibe@xxxxxxxxx plip0: Parallel port at 0xffff8802, using IRQ 8. PPP generic driver version 2.4.2 PPP Deflate Compression module registered blk_queue_max_segments: set to minimum 1 mousedev: PS/2 mouse device common for all mice input: Atari Keyboard as /devices/virtual/input/input0 blk_queue_max_segments: set to minimum 1 input: Atari mouse as /devices/virtual/input/input1 input: m68k beeper as /devices/platform/m68kspkr/input/input2 NVRAM: read data at 11 = 14 ($0e) NVRAM: read data at 10 = 128 ($80) blk_queue_max_segments: set to minimum 1 NVRAM: read data at 10 = 0 ($00) NVRAM: write data at 11 = 142 ($8e) NVRAM: read data at 0 = 52 ($34) NVRAM: read data at 2 = 37 ($25) NVRAM: read data at 4 = 1 ($01) NVRAM: read data at 7 = 23 ($17) NVRAM: read data at 8 = 3 ($03) NVRAM: read data at 9 = 51 ($33) NVRAM: read data at 6 = 1 ($01) NVRAM: write data at 11 = 14 ($0e) rtc-generic rtc-generic: registered as rtc0 softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) Atari DMA sound driver rev 016 installed Core driver edition 01.06 : FALCON driver edition 00.03 Write will use 4 fragments of 32768 bytes as default NET: Registered protocol family 17 blk_queue_max_segments: set to minimum 1 NVRAM: read data at 11 = 14 ($0e) NVRAM: read data at 10 = 128 ($80) NVRAM: read data at 10 = 0 ($00) NVRAM: write data at 11 = 142 ($8e) NVRAM: read data at 0 = 53 ($35) NVRAM: read data at 2 = 37 ($25) NVRAM: read data at 4 = 1 ($01) NVRAM: read data at 7 = 23 ($17) NVRAM: read data at 8 = 3 ($03) NVRAM: read data at 9 = 51 ($33) NVRAM: read data at 6 = 1 ($01) NVRAM: write data at 11 = 14 ($0e) rtc-generic rtc-generic: setting system clock to 2019-03-23T01:37:53 UTC (1553305073) blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 VFS: Mounted root (vfat filesystem) readonly on device 3:1. devtmpfs: mounted Freeing unused kernel memory: 116K This architecture does not have kernel memory protection. Run /bin/sh as init process WARN : Your system is too slow, some sound samples were not correctly emulated random: crng init done
Attachment:
grab0001.png
Description: PNG image
CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=60300 CONFIG_CLANG_VERSION=0 CONFIG_CC_HAS_ASM_GOTO=y CONFIG_IRQ_WORK=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="hatari" CONFIG_LOCALVERSION_AUTO=y CONFIG_BUILD_SALT="" CONFIG_DEFAULT_HOSTNAME="atari" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_PREEMPT_NONE=y CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TINY_RCU=y CONFIG_SRCU=y CONFIG_TINY_SRCU=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_BPF=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_MULTIUSER=y CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_FUTEX_PI=y CONFIG_HAVE_FUTEX_CMPXCHG=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_COMPAT_BRK=y CONFIG_SLUB=y CONFIG_M68K=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_LOW_RES=y CONFIG_NO_IOPORT_MAP=y CONFIG_ZONE_DMA=y CONFIG_HZ=100 CONFIG_PGTABLE_LEVELS=3 CONFIG_MMU=y CONFIG_MMU_MOTOROLA=y CONFIG_M68KCLASSIC=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68KFPU_EMU=y CONFIG_ADVANCED=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_NODES_SHIFT=3 CONFIG_CPU_HAS_ADDRESS_SPACES=y CONFIG_FPU=y CONFIG_ATARI=y CONFIG_PROC_HARDWARE=y CONFIG_NATFEAT=y CONFIG_NFCON=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y CONFIG_ARCH_NO_PREEMPT=y CONFIG_PLUGIN_HOSTCC="" CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_BLOCK=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_CMDLINE_PARSER=y CONFIG_BLK_WBT=y CONFIG_BLK_WBT_MQ=y CONFIG_PARTITION_ADVANCED=y CONFIG_ATARI_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_CMDLINE_PARTITION=y CONFIG_MQ_IOSCHED_DEADLINE=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_BINFMT_ELF=y CONFIG_ELFCORE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y CONFIG_HAVE_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_COREDUMP=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NEED_PER_CPU_KM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_HAVE_NET_DSA=y CONFIG_NETLINK_DIAG=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y CONFIG_MAY_USE_DEVLINK=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_GENERIC_CPU_DEVICES=y CONFIG_PARPORT=y CONFIG_PARPORT_ATARI=y CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y CONFIG_ATARI_FLOPPY=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_DUMMY_IRQ=y CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y CONFIG_IDE_PROC_FS=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_SCSI_MOD=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ATARI_SCSI=y CONFIG_ATA=y CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_SFF=y CONFIG_PATA_FALCON=y CONFIG_NETDEVICES=y CONFIG_NET_CORE=y CONFIG_DUMMY=y CONFIG_PLIP=y CONFIG_PPP=y CONFIG_PPP_DEFLATE=y CONFIG_PPP_ASYNC=y CONFIG_SLHC=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_KEYBOARD=y CONFIG_ATARI_KBD_CORE=y CONFIG_KEYBOARD_ATARI=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_ATARI=y CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=y CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 CONFIG_DEVMEM=y CONFIG_SERIAL_DEV_BUS=y CONFIG_SERIAL_DEV_CTRL_TTYPORT=y CONFIG_PRINTER=y CONFIG_NVRAM=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y CONFIG_SOFT_WATCHDOG=y CONFIG_SSB_POSSIBLE=y CONFIG_BCMA_POSSIBLE=y CONFIG_FB_CMDLINE=y CONFIG_FB_NOTIFY=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_ATARI=y CONFIG_FB_SIMPLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y CONFIG_DMASOUND_ATARI=y CONFIG_DMASOUND=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_NVMEM=y CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_GENERIC=y CONFIG_ARM_GIC_MAX_NR=1 CONFIG_NVMEM=y CONFIG_EXT2_FS=y CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_FAT_DEFAULT_UTF8=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_MEMFD_CREATE=y CONFIG_MISC_FILESYSTEMS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_FILE_DIRECT=y CONFIG_SQUASHFS_DECOMP_SINGLE=y CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_EMBEDDED=y CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=1 CONFIG_ROMFS_FS=y CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y CONFIG_NLS_CODEPAGE_865=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AES=y CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_CRC_CCITT=y CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y CONFIG_DQL=y CONFIG_GLOB=y CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y CONFIG_FONT_SUPPORT=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_SG_POOL=y CONFIG_SBITMAP=y CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 CONFIG_FRAME_WARN=1024 CONFIG_STRIP_ASM_SYMS=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y CONFIG_FRAME_POINTER=y CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0xff CONFIG_MAGIC_SYSRQ_SERIAL=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_CC_HAS_KASAN_GENERIC=y CONFIG_KASAN_STACK=1 CONFIG_CC_HAS_SANCOV_TRACE_PC=y CONFIG_DEBUG_SHIRQ=y CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_WQ_WATCHDOG=y CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_PANIC_TIMEOUT=0 CONFIG_DEBUG_TIMEKEEPING=y CONFIG_HAVE_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_LIST=y CONFIG_BUG_ON_DATA_CORRUPTION=y
Mail converted by MHonArc 2.6.19+ | http://listengine.tuxfamily.org/ |