Re: [hatari-devel] TOS 3.06 does not boot from ACSI

[ Thread Index | Date Index | More lists.tuxfamily.org/hatari-devel Archives ]


On 5 Oct 2016 at 21:15, Thomas Huth wrote:
> OK, thanks, that's good to know ... but apparently, TOS 3.06 also reads
> the value from the VME bus GPIO register ... maybe as a fall back if the
> NVRAM is not containing a sane value?
> 
I don't think so.  $ffff8e09 is an SCU general purpose register.  IIRC, TOS3 
sets a bit to indicate that this is a warm boot.  I can investigate further if 
you need.  I believe it should be read as 0x00 on a cold boot.

Roger




Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/