Re: [hatari-devel] Add GEMDOS HD after ACSI/IDE partitions

[Eero Tamminen <oak@xxxxxxxxxxxxxx>]

Hi Bob,

Do you still have the issue?

	- Eero

On 08/28/2016 10:50 PM, Eero Tamminen wrote:
> Hi,
>
> On 08/28/2016 01:57 AM, Bob Carpenter wrote:
> > Here is my command line:
> > ./hatari --trace scsi_cmd --acsi
> > /Users/bobc/Documents/Hatari/Disks/hd80mb.image -d
> > /Users/bobc/Documents/Hatari/Disks/GEMDOS/ --gemdos-drive skip --tos
> > /Users/bobc/Documents/Hatari/ROM/etos192us.img
> >
> > This is what I see:
> > ATARI MBR:
> > - Partition 0: ID=BGM, start=0x00000002, size=17.0 MB, flags=0x81 (boot)
> > - Partition 1: ID=BGM, start=0x0000884e, size=21.0 MB, flags=0x1
> > - Partition 2: ID=BGM, start=0x00013098, size=24.0 MB, flags=0x1
> > - Partition 3: ID=BGM, start=0x0001f0e2, size=18.0 MB, flags=0x1
> > - Total size: 80.1 MB in 4 partitions
> >
> > As you can see, I do not have the GEMDOS HDD emulation line in my log.
>
> As there's no GEMDOS HD mentioned, problem isn't the skipping option.
> I guess there's some issue with the directory you give.
>
> If there aren't any warnings from Hatari about it, what this shows:
>     ls -la /Users/bobc/Documents/Hatari/Disks/GEMDOS/
>
>
>     - Eero
> > Bob C
> >
> >
> > > On Aug 27, 2016, at 4:22 PM, Eero Tamminen <oak@xxxxxxxxxxxxxx> wrote:
> > >
> > > Hi,
> > >
> > > On 08/27/2016 08:36 PM, Bob Carpenter wrote:
> > > > I have been tested this option when testing the OS X UI changes.
> > > > However, even when I check the item in the SDL Hard disks menu, it
> > > > does not appear to work for me. I use my GEMDOS Hatari config file,
> > > > check that option, and let Hatari reboot.
> > > >
> > > > When the system reboots (using AHDI 5.0.0, if that matters), I use
> > > > Install Devices in TOS 2.06 and I only see the cartridge device.
> > > > However, if I manually create G and H directories under my GEMDOS
> > > > folder, then using Install Devices makes my GEMDOS drives appear. I
> > > > have only tried this with the OS X version and not the Windows
> > > > version. I do not have the ability to run the Linux version.
> > > >
> > > > I am just wondering what I am doing wrong. Thanks for your help.
> > >
> > > Can you provide Hatari your Hatari command line and Hatari output?
> > >
> > > For example, with these arguments:
> > > hatari --trace scsi_cmd --acsi STvidPly.img -d frogger/
> > > --gemdos-drive skip --tos etos512k.img
> > >
> > > Everything works fine and I get following output:
> > > --------------------------------
> > > Mounting hard drive image '/path/STvidPly.img'
> > > ATARI MBR:
> > > - Partition 0: ID=BGM, start=0x00000002, size=200.0 MB, flags=0x81
> > > (boot)
> > > - Partition 1: ID=..., start=0x00000000, size=0.0 MB, flags=0x0
> > > - Partition 2: ID=..., start=0x00000000, size=0.0 MB, flags=0x0
> > > - Partition 3: ID=..., start=0x00000000, size=0.0 MB, flags=0x0
> > > - Total size: 200.0 MB in 1 partitions
> > > GEMDOS HDD emulation, D: <-> /home/eero/work/hatari/build-gcc/frogger.
> > > --------------------------------
> > >
> > > What you get with similar command line?
> > >
> > > ("skip" option does the same as the GUI option.  With that
> > > one can also specify what drive letter GEMDOS HD uses.)
> > >
> > >
> > >     - Eero