| Re: [CBLX] cherche exemples pour ajouter à mon .mailcap |
[ Thread Index |
Date Index
| More lists.tuxfamily.org/carrefourblinux Archives
]
Salut Aldo.
En pièce jointe, je te mets mon fichier
~/.mailcap
Je n'ai pas de mailcap pour le système.
J'arrive à lire toutes mes pièces jointes.
Dans ton .muttrc il faut la ligne :
set mailcap_path="~/.mailcap"
Bonne chance.
--
Philippe
# Copyright (c) 1991 Bell Communications Research, Inc. (Bellcore)
#
# Permission to use, copy, modify, and distribute this material
# for any purpose and without fee is hereby granted, provided
# that the above copyright notice and this permission notice
# appear in all copies, and that the name of Bellcore not be
# used in advertising or publicity pertaining to this
# material without the specific, prior written permission
# of an authorized representative of Bellcore. BELLCORE
# MAKES NO REPRESENTATIONS ABOUT THE ACCURACY OR SUITABILITY
# OF THIS MATERIAL FOR ANY PURPOSE. IT IS PROVIDED "AS IS",
# WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES.
#
# Prototype Mailcap file
# Note that support for text & multipart are "built in" to metamail,
# as are rudimentary support for message, and application.
# However, any of these may be overridden in mailcap.
#
# Note that users may override or extend this with a .mailcap
# file in their own directory. However, there is NO NEED
# for them to copy entries from this file, as metamail will
# pick up entries from both the system and personal mailcap files.
#
# NOTE: This file has been heavily modified for use as an example
# configuration file for Lynx
# In the samples given test=test -n "$DISPLAY" is used to
# determine if the current session is X capible by checking
# for the existance of a DISPLAY environment variable.
# Lynx actually uses a getenv() call for DISPLAY (DECW$DISPLAY
# on VMS) when it encounters test=test -n "$DISPLAY" or
# test=test -z "$DISPAY" in a viewer assignment, instead of
# spawning to execute "test" via a system() call, i.e., those
# two strings, respectively, are handled equivalently to the
# :XWINDOWS and :NON_XWINDOWS flags for VIEWER: assignments
# in lynx.cfg. Any system without the DISPLAY (or DECW$DISPLAY)
# environment variable will be assumed to be Non-X.
# You can append a ';' followed by "q=#.#", e.g., ; q=0.002
# to set the quality parameter for the Content-Type, which can be
# included in the Accept: header Lynx sends to http servers (the
# default quality value is 1.0, and Lynx appends the parameter
# to the Content-Type only if the value is less than 1.0).
# You can append a ';' followed by "mxb=#", e.g., ; mxb=1000000
# to set the maxbytes parameter for the Content-Type, which can be
# included in the Accept: header Lynx sends to http servers (the
# default maxbytes value is 0, meaning no maximum, and Lynx appends
# the parameter to the Content-Type only if the value exceeds 0).
# The following line is for sites where xv understands jpeg but xloadimage
# is preferred.
#
# the test line specifies that this viewer should only be used if
# the display variable is set.
#image/jpeg; xv %s; test=test -n "$DISPLAY"
# The following sends all other image subtypes to xloadimage
#image/*; xloadimage %s; ; test=test -n "$DISPLAY"
# The following sends all other image subtypes to xv
#image/*; xv %s; ; test=test -n "$DISPLAY"
# If you have an interactive Postscript interpreter, you should think carefully
# before replacing lpr with it in the following line, because PostScript
# can be an enormous security hole. It is RELATIVELY harmless
# when sent to the printer...
# This one is for NON-X
#application/postscript; lpr %s \; echo SENT FILE TO PRINTER; ;test=test -z "$DISPLAY"
# This one is for X. It's already the default via src/HTInit.c.
#application/postscript; ghostview %s; ; test=test -n "$DISPLAY"
# The following should be commented out if you do NOT have safe-tcl
# and should be uncommented if you DO have safe-tcl
#application/safe-tcl; swish -safe -messaging -f %s
# A common problem with the mailcap mechanism is getting differential
# behavior from different programs. This problem is compounded by the fact
# that some programs, notably Mosaic, do not implement the "test" clause in
# mailcap files. If you are using Lynx and X Mosaic together you should
# place all X-centric entries before non-X entries. X Mosaic will use
# whichever entry is defined first so further entries will be ignored.
#
# Lynx exports the environment variable LYNX_VERSION, so it can be tested
# by scripts to determine if Lynx is running or not. However, the string
# test=test -n "$LYNX_VERSION"
# is handled simply as a flag which yields success when Lynx encounters it
# in the mailcap file (i.e., Lynx does not bother to execute "test" via a
# system() call to find out if it's running, because it obviously is).
# Inclusion of the string for that test can be used to prevent other
# software which reads the mailcap file from acting on assignments intended
# only for Lynx. The string
# test=test -z "$LYNX_VERSION"
# similarly is treated by Lynx simply as a flag which yields failure.
text/html; /usr/bin/lynx -force_html '%s'
application/xhtml+xml; lynx -force_html '%s'
application/pgp-keys; pgp -f < '%s' ; copiousoutput
#application/msword; antiword '%s' |less
application/msword; catdoc '%s' |less
application/pdf; pdftotext -raw -enc UTF-8 '%s' - |less
application/x-pdf; pdftotext -raw -enc UTF-8 '%s' - |less
application/acrobat; pdftotext -raw -enc UTF-8 '%s' - |less
application/vnd.ms-excel; xls2csv '%s' |less
audio/*; mplayer '%s'
audio/mpeg; mplayer '%s'; #nametemplate=%s.mp3
audio/mpegurl; mplayer -playlist '%s'; nametemplate=%s.m3u
audio/x-mpegurl; mplayer -playlist '%s'; nametemplate=%s.m3u
audio/x-scpls; mplayer '%s'; nametemplate=%s.pls
audio/x-wav; mplayer '%s'; nametemplate=%s.wav
application/x-ogg; mplayer '%s'; nametemplate=%s.ogg
application/ogg; mplayer '%s'; nametemplate=%s.ogg
audio/x-flac; mplayer '%s'; nametemplate=%s.flac
application/x-flac; mplayer '%s'; nametemplate=%s.flac
audio/x-pn-realaudio; mplayer -playlist '%s'; nametemplate=%s.ram
audio/*; mplayer '%s'
application/octet-stream; mplayer '%s'