Re: [LA-discussions] non reconnaissance du lecteur de carte sur SD EEEPC 701

[ Thread Index | Date Index | More linuxarverne.org/discussions Archives ]

désolé, j'ai pas fait attention à $ ...
toto@toto-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Atheros Communications L2 100 Mbit Ethernet Adapter (rev a0)

toto@toto-laptop:~$ lsmod
Module                  Size  Used by
binfmt_misc             6587  1
ppdev                   5259  0
snd_hda_codec_realtek   203374  1
fbcon                  35102  71
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0
vgastate                8961  1 vga16fb
arc4                    1153  2
joydev                  8708  0
snd_hda_intel          22037  2
snd_hda_codec          74201  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5412  1 snd_hda_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70694  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26726  0
snd_seq_midi            4557  0
snd_rawmidi            19056  1 snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ath5k                 121664  0
snd                    54148  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i915                  286079  4
uvcvideo               57054  0
mac80211              205402  1 ath5k
ath                     7611  1 ath5k
drm_kms_helper         29297  1 i915
videodev               34361  1 uvcvideo
cfg80211              126496  3 ath5k,mac80211,ath
psmouse                63245  0
soundcore               6620  1 snd
intel_agp              24119  2 i915
v4l1_compat            13251  2 uvcvideo,videodev
drm                   162409  5 i915,drm_kms_helper
serio_raw               3978  0
led_class               2864  1 ath5k
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
agpgart                31724  2 intel_agp,drm
i2c_algo_bit            5028  1 i915
atl2                   22383  0
video                  17375  1 i915
output                  1871  1 video
eeepc_laptop           14331  0
lp                      7060  0
parport                32635  2 ppdev,lp
usb_storage            39553  0

et voila la derniere commande il manque le début, mais je n'arrive pas à tout selectionner.


[    0.000000] allocated 5199040 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f780)
[    0.000000] Memory: 1009052k/1039872k available (4680k kernel code, 29948k reserved, 2122k data, 656k init, 130568k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a5000 - 0xc0849000   ( 656 kB)
[    0.000000]       .data : 0xc05922c7 - 0xc07a4e68   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05922c7   (4680 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 630.107 MHz processor.
[    0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 1260.21 BogoMIPS (lpj=2520428)
[    0.004079] Security Framework initialized
[    0.008054] AppArmor: AppArmor initialized
[    0.008079] Mount-cache hash table entries: 512
[    0.008452] Initializing cgroup subsys ns
[    0.008467] Initializing cgroup subsys cpuacct
[    0.008481] Initializing cgroup subsys memory
[    0.008508] Initializing cgroup subsys devices
[    0.008517] Initializing cgroup subsys freezer
[    0.008525] Initializing cgroup subsys net_cls
[    0.008592] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008602] CPU: L2 cache: 512K
[    0.008614] mce: CPU supports 5 MCE banks
[    0.008638] CPU0: Thermal monitoring enabled (TM1)
[    0..008665] Performance Events: p6 PMU driver.
[    0.008691] ... version:                0
[    0.008697] ... bit width:              32
[    0.008703] ... generic registers:      2
[    0.008711] ... value mask:             00000000ffffffff
[    0.008718] ... max period:             000000007fffffff
[    0.008725] ... fixed-purpose events:   0
[    0.008731] ... event mask:             0000000000000003
[    0.008747] Checking 'hlt' instruction... OK.
[    0.026307] SMP alternatives: switching to UP code
[    0.047324] Freeing SMP alternatives: 19k freed
[    0.047360] ACPI: Core revision 20090903
[    0.072030] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.072049] ftrace: allocating 21789 entries in 43 pages
[    0.076172] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.080278] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.119984] CPU0: Intel(R) Celeron(R) M processor          900MHz stepping 08
[    0.120001] Brought up 1 CPUs
[    0.120001] Total of 1 processors activated (1260.21 BogoMIPS).
[    0.120001] CPU0 attaching NULL sched-domain.
[    0.120001] devtmpfs: initialized
[    0.120001] regulator: core version 0.5
[    0.120001] Time:  7:41:51  Date: 10/25/10
[    0.120001] NET: Registered protocol family 16
[    0.120001] EISA bus registered
[    0.120001] ACPI: bus type pci registered
[    0.120001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.120001] PCI: Not using MMCONFIG.
[    0.120001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.120001] PCI: Using configuration type 1 for base access
[    0.122089] bio: create slab <bio-0> at 0
[    0.124422] ACPI: EC: Look up EC in DSDT
[    0.127257] ACPI: Executed 1 blocks of module-level executable AML code
[    0.148101] ACPI: Interpreter enabled
[    0.148120] ACPI: (supports S0 S3 S4 S5)
[    0.148189] ACPI: Using IOAPIC for interrupt routing
[    0.148342] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.154751] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.154760] PCI: Using MMCONFIG for extended config space
[    0.170174] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = "">[    0.170705] ACPI: No dock devices found.
[    0.171134] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.171351] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
[    0.171366] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07]
[    0.171380] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.171394] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
[    0.171470] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
[    0.171630] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
[    0.171705] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.171715] pci 0000:00:1b.0: PME# disabled
[    0.171827] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.171837] pci 0000:00:1c.0: PME# disabled
[    0.171951] pci 0000:00:1c..1: PME# supported from D0 D3hot D3cold
[    0.171961] pci 0000:00:1c.1: PME# disabled
[    0.172099] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.172109] pci 0000:00:1c.2: PME# disabled
[    0.172194] pci 0000:00:1d..0: reg 20 io port: [0xe400-0xe41f]
[    0.172280] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
[    0.172364] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[    0.172449] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
[    0.172663] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.172680] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.172691] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.172702] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0380-03ff
[    0.172761] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[    0.172775] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[    0.172789] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[    0..172804] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[    0.172818] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[    0.172863] pci 0000:00:1f.2: PME# supported from D3hot
[    0.172872] pci 0000:00:1f.2: PME# disabled
[    0.172949] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.173150] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[    0.173201] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbfa0000-0xfbfbffff]
[    0.173260] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.173271] pci 0000:03:00.0: PME# disabled
[    0.173357] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[    0.173455] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff]
[    0.173639] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[    0.173655] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[    0.173735] pci 0000:00:1e.0: transparent bridge
[    0.173782] pci_bus 0000:00: on NUMA node 0
[    0.173799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.174261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.174420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.174562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.188740] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.189094] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.189444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.189797] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.190143] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.190488] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.190836] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.191184] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.191530] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.191557] vgaarb: loaded
[    0.191916] SCSI subsystem initialized
[    0.192127] libata version 3.00 loaded.
[    0.192398] usbcore: registered new interface driver usbfs
[    0.192437] usbcore: registered new interface driver hub
[    0.192534] usbcore: registered new device driver usb
[    0.192961] ACPI: WMI: Mapper loaded
[    0.192968] PCI: Using ACPI for IRQ routing
[    0.193404] NetLabel: Initializing
[    0.193413] NetLabel:  domain hash size = 128
[    0.193418] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.193456] NetLabel:  unlabeled traffic allowed by default
[    0.193899] hpet clockevent registered
[    0.193911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.193923] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.193939] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.196068] Switching to clocksource tsc
[    0.202020] AppArmor: AppArmor Filesystem Enabled
[    0.202081] pnp: PnP ACPI init
[    0.202126] ACPI: bus type pnp registered
[    0.207809] pnp: PnP ACPI: found 13 devices
[    0.207835] ACPI: ACPI bus type pnp unregistered
[    0.207848] PnPBIOS: Disabled by ACPI PNP
[    0.207888] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    0.207917] system 00:08: ioport range 0x380-0x383 has been reserved
[    0.207927] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.207937] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.207947] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.207957] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.207968] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.207978] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.207997] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.208007] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.208024] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.208041] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.208059] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.208069] system 00:0c: iomem range 0xc0000-0xd3fff could not be reserved
[    0.208079] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.208089] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[    0.243217] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[    0.243228] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    0.243241] pci 0000:00:1c.0:   MEM window: 0x40000000-0x401fffff
[    0.243254] pci 0000:00:1c.0:   PREFETCH window: 0x00000040200000-0x000000403fffff
[    0.243269] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.243278] pci 0000:00:1c.1:   IO window: 0x2000-0x2fff
[    0.243291] pci 0000:00:1c.1:   MEM window: 0xfbf00000-0xfbffffff
[    0.243302] pci 0000:00:1c.1:   PREFETCH window: 0x00000040400000-0x000000405fffff
[    0.243317] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
[    0.243326] pci 0000:00:1c.2:   IO window: 0x3000-0x3fff
[    0.243339] pci 0000:00:1c.2:   MEM window: 0xf8000000-0xfbefffff
[    0.243350] pci 0000:00:1c.2:   PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[    0.243365] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    0.243372] pci 0000:00:1e.0:   IO window: disabled
[    0.243383] pci 0000:00:1e.0:   MEM window: disabled
[    0.243392] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.243423] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.243439]   alloc irq_desc for 16 on node -1
[    0.243446]   alloc kstat_irqs on node -1
[    0.243463] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.243479] pci 0000:00:1c.0: setting latency timer to 64
[    0.243497] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.243507]   alloc irq_desc for 17 on node -1
[    0.243512]   alloc kstat_irqs on node -1
[    0.243523] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.243534] pci 0000:00:1c.1: setting latency timer to 64
[    0.243553] pci 0000:00:1c.2: enabling device (0106 -> 0107)
[    0.243562]   alloc irq_desc for 18 on node -1
[    0.243568]   alloc kstat_irqs on node -1
[    0.243579] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.243590] pci 0000:00:1c.2: setting latency timer to 64
[    0.243605] pci 0000:00:1e.0: setting latency timer to 64
[    0.243617] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.243627] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.243636] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
[    0.243645] pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff]
[    0.243654] pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff]
[    0.243663] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
[    0.243671] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[    0.243680] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[    0.243690] pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
[    0.243698] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[    0.243707] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
[    0.243716] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.243725] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[    0.243866] NET: Registered protocol family 2
[    0.244142] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.245078] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.247505] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.248729] TCP: Hash tables configured (established 131072 bind 65536)
[    0.248739] TCP reno registered
[    0.249050] NET: Registered protocol family 1
[    0.249118] pci 0000:00:02.0: Boot video device
[    0.249731] cpufreq-nforce2: No nForce2 chipset.
[    0.249823] Scanning for low memory corruption every 60 seconds
[    0.250178] audit: initializing netlink socket (disabled)
[    0.250226] type=2000 audit(1287992511.247:1): initialized
[    0.283293] Trying to unpack rootfs image as initramfs...
[    0.320381] highmem bounce pool size: 64 pages
[    0.320401] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.328062] VFS: Disk quotas dquot_6.5.2
[    0.328297] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.336499] fuse init (API version 7.13)
[    0.336872] msgmni has been set to 1716
[    0.337600] alg: No test for stdrng (krng)
[    0.337797] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.337810] io scheduler noop registered
[    0.337816] io scheduler anticipatory registered
[    0.337822] io scheduler deadline registered
[    0.337950] io scheduler cfq registered (default)
[    0.338314]   alloc irq_desc for 24 on node -1
[    0.338322]   alloc kstat_irqs on node -1
[    0.338349] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.338368] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.338618]   alloc irq_desc for 25 on node -1
[    0.338624]   alloc kstat_irqs on node -1
[    0.338645] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.338661] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.338906]   alloc irq_desc for 26 on node -1
[    0.338913]   alloc kstat_irqs on node -1
[    0.338933] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.338949] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.339162] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.339484] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.339850] ACPI: AC Adapter [AC0] (on-line)
[    0.340165] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.344757] ACPI: Lid Switch [LID]
[    0.344954] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.344975] ACPI: Sleep Button [SLPB]
[    0.345124] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.345133] ACPI: Power Button [PWRB]
[    0.345277] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.345285] ACPI: Power Button [PWRF]
[    0.346927] Marking TSC unstable due to TSC halts in idle
[    0.347168] processor LNXCPU:00: registered as cooling_device0
[    0.355913] Switching to clocksource hpet
[    0.368213] thermal LNXTHERM:01: registered as thermal_zone0
[    0.368248] ACPI: Thermal Zone [TZ00] (28 C)
[    0.378545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.380123] isapnp: Scanning for PnP cards...
[    0..390659] brd: module loaded
[    0.443910] loop: module loaded
[    0.444247] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.444564] ata_piix 0000:00:1f.2: version 2.13
[    0.444612]   alloc irq_desc for 19 on node -1
[    0.444619]   alloc kstat_irqs on node -1
[    0.444638] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.444654] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.444758] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.448381] scsi0 : ata_piix
[    0.448733] scsi1 : ata_piix
[    0.461945] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.461957] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.466218] Fixed MDIO Bus: probed
[    0.466334] PPP generic driver version 2.4.2
[    0.466530] tun: Universal TUN/TAP device driver, 1.6
[    0.466536] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.466809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.466873] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.466923] uhci_hcd: USB Universal Host Controller Interface driver
[    0.467039]   alloc irq_desc for 23 on node -1
[    0.467046]   alloc kstat_irqs on node -1
[    0.467067] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.467090] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.467100] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.467221] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.467298] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[    0.467685] usb usb1: configuration #1 chosen from 1 choice
[    0.467773] hub 1-0:1.0: USB hub found
[    0.467795] hub 1-0:1.0: 2 ports detected
[    0.467933] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.467952] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.467961] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.481312] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    0.481392] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[    0.481736] usb usb2: configuration #1 chosen from 1 choice
[    0.481827] hub 2-0:1.0: USB hub found
[    0.481853] hub 2-0:1.0: 2 ports detected
[    0.481997] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.482018] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.482028] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.482146] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    0.482207] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    0.482484] usb usb3: configuration #1 chosen from 1 choice
[    0.482570] hub 3-0:1.0: USB hub found
[    0.482589] hub 3-0:1.0: 2 ports detected
[    0.482710] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.482730] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.482739] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.482842] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    0.482900] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[    0.483212] usb usb4: configuration #1 chosen from 1 choice
[    0.483297] hub 4-0:1.0: USB hub found
[    0.483317] hub 4-0:1.0: 2 ports detected
[    0.483617] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.612572] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.636055] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.636549] mice: PS/2 mouse device common for all mice
[    0.637073] rtc_cmos 00:03: RTC can wake from S4
[    0.637211] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.637265] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.637658] device-mapper: uevent: version 1.0.3
[    0.641272] ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66
[    0.641283] ata2.00: 7815024 sectors, multi 0: LBA
[    0.641897] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[    0.644126] device-mapper: multipath: version 1.1.0 loaded
[    0.644135] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.651375] EISA: Probing bus 0 at eisa.0
[    0.651393] Cannot allocate resource for EISA slot 1
[    0.651400] Cannot allocate resource for EISA slot 2
[    0.651407] Cannot allocate resource for EISA slot 3
[    0.651437] EISA: Detected 0 cards.
[    0.651753] cpuidle: using governor ladder
[    0.651936] cpuidle: using governor menu
[    0.653293] TCP cubic registered
[    0.653809] NET: Registered protocol family 10
[    0.655185] lo: Disabled Privacy Extensions
[    0.656168] NET: Registered protocol family 17
[    0.656520] ata2.00: configured for UDMA/66
[    0.661601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.664235] Using IPI No-Shortcut mode
[    0.664513] PM: Resume from disk failed.
[    0.664546] registered taskstats version 1
[    0.665110]   Magic number: 14:775:673
[    0.665307] rtc_cmos 00:03: setting system clock to 2010-10-25 07:41:52 UTC (1287992512)
[    0.665317] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.665322] EDD information not available.
[    0.820809] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    1.040082] usb 3-1: configuration #1 chosen from 1 choice
[    1.180089] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    1.309214] ACPI: Battery Slot [BAT0] (battery present)
[    1.360338] isapnp: No Plug & Play device found
[    1.360763] scsi 1:0:0:0: Direct-Access     ATA      SILICONMOTION SM n/a  PQ: 0 ANSI: 5
[    1.361247] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.361512] sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB)
[    1.361674] sd 1:0:0:0: [sda] Write Protect is off
[    1.361683] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.361763] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.362196]  sda: sda1 sda2 < sda5 >
[    1.366171] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.376332] usb 4-2: configuration #1 chosen from 1 choice
[    1.688983] Freeing initrd memory: 7778k freed
[    1.702789] Freeing unused kernel memory: 656k freed
[    1.704338] Write protecting the kernel text: 4684k
[    1.704452] Write protecting the kernel read-only data: 1840k
[    1.762315] udev: starting version 151
[    2.484994] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    2.488847] Initializing USB Mass Storage driver...
[    2.490025] scsi2 : SCSI emulation for USB Mass Storage devices
[    2.490654] usbcore: registered new interface driver usb-storage
[    2.490664] USB Mass Storage support registered.
[    2..492122] usb-storage: device found at 2
[    2.492130] usb-storage: waiting for device to settle before scanning
[    7.493441] usb-storage: device scan complete
[    7.498783] scsi 2:0:0:0: Direct-Access     USB2.0   CardReader SD0   0100 PQ: 0 ANSI: 0
[    7.500486] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    7.510319] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    8.548781] Adding 226296k swap on /dev/sda5.  Priority:-1 extents:1 across:226296k
[    8.771154] udev: starting version 151
[    9.039656] lp: driver loaded but no devices found
[    9..069433] eeepc_laptop: Eee PC Hotkey Driver
[    9.069449] eeepc_laptop: model 701 does not officially support setting cpu speed
[    9.069456] eeepc_laptop: cpufv disabled to avoid instability
[    9.237530] eeepc_laptop: Hotkey init flags 0x41
[    9.239611] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    9.239769] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    9.240125] eeepc_laptop: Get control methods supported: 0x101711
[    9.279708] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input7
[   10.012195] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   10.012206] Copyright (c) 2007 Atheros Corporation.
[   10.012311] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.012334] atl2 0000:03:00.0: setting latency timer to 64
[   10.382123] Linux agpgart interface v0.103
[   10.565531] intel_rng: FWH not detected
[   10.752972] type=1505 audit(1287992522..586:2):  operation="profile_load" pid=544 name="/sbin/dhclient3"
[   10.754882] type=1505 audit(1287992522.586:3):  operation="profile_load" pid=544 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   10.755907] type=1505 audit(1287992522.586:4):  operation="profile_load" pid=544 name="/usr/lib/connman/scripts/dhclient-script"
[   10.997426] [drm] Initialized drm 1.1.0 20060810
[   11.044927] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[   11.045273] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   11.093993] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   11.340138]   alloc irq_desc for 27 on node -1
[   11.340148]   alloc kstat_irqs on node -1
[   11.340182] atl2 0000:03:00.0: irq 27 for MSI/MSI-X
[   11.352781] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.353928] cfg80211: Calling CRDA to update world regulatory domain
[   11.439304] Linux video capture interface: v2.00
[   11.443754] cfg80211: World regulatory domain updated:
[   11.443768]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.443779]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.443788]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.443797]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.443806]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.443815]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.769048] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
[   11.780536] input: UVC Camera (eb1a:2761) as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input8
[   11.781182] usbcore: registered new interface driver uvcvideo
[   11.783266] USB Video Class driver (v0.1.0)
[   11.874360] type=1505 audit(1287992523.706:5):  operation="profile_replace" pid=630 name="/sbin/dhclient3"
[   11.878265] type=1505 audit(1287992523.710:6):  operation="profile_replace" pid=630 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.879317] type=1505 audit(1287992523.710:7):  operation="profile_replace" pid=630 name="/usr/lib/connman/scripts/dhclient-script"
[   11.896476] type=1505 audit(1287992523.730:8):  operation="profile_load" pid=631 name="/usr/bin/evince"
[   11.937615] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.937634] i915 0000:00:02.0: setting latency timer to 64
[   11.958728] [drm] set up 7M of stolen space
[   11.974694] [drm] initialized overlay support
[   12.354184] type=1505 audit(1287992524.186:9):  operation="profile_load" pid=631 name="/usr/bin/evince-previewer"
[   12.370730] ath5k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   12.370754] ath5k 0000:01:00.0: setting latency timer to 64
[   12.370837] ath5k 0000:01:00.0: registered as 'phy0'
[   12.902943] type=1505 audit(1287992524.734:10):  operation="profile_load" pid=631 name="/usr/bin/evince-thumbnailer"
[   12.974131] type=1505 audit(1287992524.806:11):  operation="profile_load" pid=646 name="/usr/lib/cups/backend/cups-pdf"
[   13.254419] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
[   13.377855] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   13.690216] ath: EEPROM regdomain: 0x60
[   13.690226] ath: EEPROM indicates we should expect a direct regpair map
[   13.690239] ath: Country alpha2 being used: 00
[   13.690245] ath: Regpair used: 0x60
[   13.709884] phy0: Selected rate control algorithm 'minstrel'
[   13.713327] Registered led device: ath5k-phy0::rx
[   13.713632] Registered led device: ath5k-phy0::tx
[   13.713646] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   13.822942] fb0: inteldrmfb frame buffer device
[   13.822953] registered panic notifier
[   13.822976] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.823080] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.823150] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.840387] vga16fb: initializing
[   13.840403] vga16fb: mapped to 0xc00a0000
[   13.840417] vga16fb: not registering due to another framebuffer present
[   13.873767] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.107424] Console: switching to colour frame buffer device 100x30
[   14.395241] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   14.527655] ppdev: user-space parallel port driver
[   50.835225] wlan0: deauthenticating from 00:1d:6a:68:44:67 by local choice (reason=3)
[   50.849082] wlan0: direct probe to AP 00:1d:6a:68:44:67 (try 1)
[   50.852441] wlan0: direct probe responded
[   50.852454] wlan0: authenticate with AP 00:1d:6a:68:44:67 (try 1)
[   50.854498] wlan0: authenticated
[   50.854546] wlan0: associate with AP 00:1d:6a:68:44:67 (try 1)
[   50.861794] wlan0: RX AssocResp from 00:1d:6a:68:44:67 (capab=0x421 status=0 aid=1)
[   50.861807] wlan0: associated
[   50.863799] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   50.868643] cfg80211: Calling CRDA for country: FR
[   50.889931] cfg80211: Received country IE:
[   50.889944] cfg80211: Regulatory domain: FR
[   50.889950]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   50.889960]     (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
[   50.889967] cfg80211: CRDA thinks this should applied:
[   50.889973] cfg80211: Regulatory domain: FR
[   50.889978]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   50.889987]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   50.889996]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   50.890004]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   50.890012]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   50.890018] cfg80211: We intersect both of these and get:
[   50.890024] cfg80211: Regulatory domain: 98
[   50.890029]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   50.890038]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   50.890053] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
[   50.890071] cfg80211: Current regulatory domain updated by AP to: FR
[   50.890077]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   50.890086]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   61.840034] wlan0: no IPv6 routers present
[   96.391712] wlan0: deauthenticating from 00:1d:6a:68:44:67 by local choice (reason=3)
[ 4199.039687] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 4199.040321] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4209.180023] eth0: no IPv6 routers present


--
--------------------------------------------------------
Timothée JEAN & Julie MARONCLES
luthiers
http://luthiers-huriel.com
contact@xxxxxxxxxxxxxxxxxxx
--------------------------------------------------------

Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/