Re: [chrony-users] Issue with chrony dropping PPS signal

[ Thread Index | Date Index | More chrony.tuxfamily.org/chrony-users Archives ]


Why? The server will keep freewheeling, with both its offset and its rate
having been adjusted to UTC, so it should keep pretty good time for quite a
while (even better if you have temperature corrections incorporated into
chrony). Are all your client clocks that good that they can all keep
freewheeling time that is as good as or better than your server, since that is
what will happen if your server stops serving time.

Once your position is known, even one sattelite should give good time. It
sounds like it is the receiver that is problematic. Is your antenna really
that borderline?


William G. Unruh __| Canadian Institute for|____ Tel: +1(604)822-3273
Physics&Astronomy _|___ Advanced Research _|____ Fax: +1(604)822-5324
UBC, Vancouver,BC _|_ Program in Cosmology |____ unruh@xxxxxxxxxxxxxx
Canada V6T 1Z1 ____|____ and Gravity ______|_ www.theory.physics.ubc.ca/

On Fri, 5 Mar 2021, Vincenzo Miceli wrote:

[CAUTION: Non-UBC Email] Hi Miroslav, Hal,

it turns out that the GPS loses satellite fix and the PPS stops as you have predicted. I can fix that by using an active antenna with
much better gain.
Is there any way for chrony to stop provide time to clients if the PPS signal is lost?

Thanks again!!

Enzo

______________________________________________________________________________________________________________________________________
From: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Sent: Thursday 4 March 2021 13:19
To: chrony-users@xxxxxxxxxxxxxxxxxxxx <chrony-users@xxxxxxxxxxxxxxxxxxxx>
Subject: Re: [chrony-users] Issue with chrony dropping PPS signal  
On Thu, Mar 04, 2021 at 01:19:51PM +0000, Vincenzo Miceli wrote:
> Thanks Miroslav,
>
> I want to make sure I understand... you are asking to run something like watch -n 1 'cat /sys/class/pps/pps0/assert'   next time I
detect the issue and see if the result is changing to indicate PPS is still being issued by the GPS right?
> I'll do that then.

Yes, or collect it in a log to not miss it, e.g. every 10 seconds, or
use the script Hal linked.

--
Miroslav Lichvar


--
To unsubscribe email chrony-users-request@xxxxxxxxxxxxxxxxxxxx
with "unsubscribe" in the subject.
For help email chrony-users-request@xxxxxxxxxxxxxxxxxxxx
with "help" in the subject.
Trouble?  Email listmaster@xxxxxxxxxxxxxxxxxxxx.




Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/