[chrony-users] time sync query

Hi,

I am using chrony stable 3.1 version.

Below is my cfg:

#For GPS data feed

refclock SOCK /var/run/chrony.ttyS1.sock poll 2 refid GPS maxsamples 4 prefer

#For CAN data feed

refclock SOCK /var/run/chrony.ttyS2.sock poll 2 delay 0.5 refid CAN maxsamples 5

#target is one hop reachable

local stratum 1

keyfile /etc/chrony/chrony.keys

makestep 0.01 -1

Below is the chrony sources o/p:

210 Number of sources = 2

.-- Source mode '^' = server, '=' = peer, '#' = local clock.

/ .- Source state '*' = current synced, '+' = combined , '-' = not combined,

| / '?' = unreachable, 'x' = time may be in error, '~' = time too variable.

|| .- xxxx [ yyyy ] +/- zzzz

|| Reachability register (octal) -. | xxxx = adjusted offset,

|| Log2(Polling interval) --. | | yyyy = measured offset,

|| \ | | zzzz = estimated error.

|| | | \

MS Name/IP address Stratum Poll Reach LastRx Last sample

===============================================================================

#? GPS 0 2 377 2 -4509h[ -4509h] +/- 6567m

#? CAN 0 2 0 - +0ns[ +0ns] +/- 0ns

My query:

Although I have given makestep 0.01 -1 and maxsample for GPS refclock is set to 4, I am still not able to see the synch happening.

I am feeding offset data to GPS refclock for every 1 sec.

Can you please suggest any configuration changes here. However sometimes it works.

Similar issue I am finding in chrony 2.2 that’s where I thought of testing with 3.1 if this has to do with some bug.

Thanks and Regards,

Bhushan J.