[chrony-dev] [GIT] chrony/chrony.git branch, master, updated. 2.2.1-105-ge3191e3 |
[ Thread Index |
Date Index
| More chrony.tuxfamily.org/chrony-dev Archives
]
This is an automated email from git. It was enerated because a ref
change was pushed to the repository "chrony/chrony.git".
The branch, master has been updated
via e3191e372b9925333f66bf36908f504e1dde7c12 (commit)
via 705e32acdc2e438e7d9a7394560d0f2d63054129 (commit)
via 6e4dd9302df5e6d576a18e22bd86167d0296a7d2 (commit)
via ea002130d720ea0d365f216167d74ac53f97b237 (commit)
via 7ba5ffa706821da789130185cdbfd3013e227cde (commit)
via 861ac013bcc54fa7b3c92cc4b43a8e2071885907 (commit)
via a6da963f45011c8f13fc6a2991101808d90e9634 (commit)
via 55ba7ee2a180cb2b82da165b8b083da170eeb569 (commit)
via 3121f31cedaa682561e22db6efdf2f9627929ca4 (commit)
via da296db91ded60c583099be0319623e37d24a85f (commit)
via d36ca9288a77c519563299ab594862de7886fae1 (commit)
via 8549043a3fb0e9ea659d888aec2fe4c8bb4e5ea6 (commit)
via e0ae2b4bb52240aa8b931e96e7f8da6571caa11a (commit)
via aad42ceaec7d0685ca01e93fc19df555302aebda (commit)
from f225469e6ed93be779c3e4ae9edbc41c73fa22b5 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit e3191e372b9925333f66bf36908f504e1dde7c12
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Fri Jan 29 16:50:43 2016 +0100
cmdmon: update protocol changelog
commit 705e32acdc2e438e7d9a7394560d0f2d63054129
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Fri Jan 29 15:46:56 2016 +0100
cmdmon: define new types for CLIENT_ACCESSES_BY_INDEX command
There was an incompatible change in the client access report. To avoid
bumping the protocol version drop support for the original request/reply
types and define new CLIENT_ACCESSES_BY_INDEX2 types as a newer version
of the command.
commit 6e4dd9302df5e6d576a18e22bd86167d0296a7d2
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Fri Jan 29 15:35:32 2016 +0100
cmdmon: allow unhandled commands
Replace the assert() with a debug message to not crash if someone
forgets to implement a newly defined command.
commit ea002130d720ea0d365f216167d74ac53f97b237
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Fri Jan 29 15:32:47 2016 +0100
cmdmon: reply to invalid commands
If an unknown command is received (e.g. from a future client), it should
get a reply and print an error code instead of timing out.
commit 7ba5ffa706821da789130185cdbfd3013e227cde
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Fri Jan 29 15:06:43 2016 +0100
cmdmon: update debug messages
commit 861ac013bcc54fa7b3c92cc4b43a8e2071885907
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Fri Jan 29 13:46:38 2016 +0100
cmdmon: use 32-bit fields in client access report
The clientlog record still uses 16-bit integers to count dropped
packets, but this will avoid an incompatible change in the command
reply if there will be a need to count more than 2^16 drops.
commit a6da963f45011c8f13fc6a2991101808d90e9634
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Thu Jan 28 14:52:34 2016 +0100
clientlog: don't allow rate limiting with noclientlog
commit 55ba7ee2a180cb2b82da165b8b083da170eeb569
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Fri Jan 29 17:18:14 2016 +0100
doc: update description of clients command
commit 3121f31cedaa682561e22db6efdf2f9627929ca4
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Thu Jan 28 14:23:26 2016 +0100
doc: describe rate limiting directives
commit da296db91ded60c583099be0319623e37d24a85f
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Mon Jan 25 17:55:20 2016 +0100
examples: update for recent changes
commit d36ca9288a77c519563299ab594862de7886fae1
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Mon Jan 25 17:24:08 2016 +0100
doc: update keyfile description
commit 8549043a3fb0e9ea659d888aec2fe4c8bb4e5ea6
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Tue Jan 26 15:35:55 2016 +0100
conf: set logchange to 1 second by default
logchange is now always enabled, with 1 second threshold by default.
commit e0ae2b4bb52240aa8b931e96e7f8da6571caa11a
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Mon Jan 25 18:03:39 2016 +0100
client: generate key 1 by default in keygen command
commit aad42ceaec7d0685ca01e93fc19df555302aebda
Author: Miroslav Lichvar <mlichvar@xxxxxxxxxx>
Date: Mon Jan 25 16:50:51 2016 +0100
keys: warn about short key only if used by source
After restricting authentication of servers and peers to the specified
key, a short key in the key file is a security problem from the client's
point of view only if it's specified for a source.
-----------------------------------------------------------------------
Summary of changes:
candm.h | 20 +++--
chrony.texi.in | 172 +++++++++++++++++++++++++++--------------
client.c | 17 ++--
clientlog.c | 33 ++++----
cmdmon.c | 40 +++++-----
conf.c | 15 ++--
conf.h | 2 +-
examples/chrony.conf.example2 | 6 --
examples/chrony.conf.example3 | 29 ++++---
examples/chrony.keys.example | 15 ++--
keys.c | 18 ++++-
keys.h | 1 +
ntp_core.c | 9 ++-
pktlength.c | 8 +-
reference.c | 13 +---
15 files changed, 228 insertions(+), 170 deletions(-)
hooks/post-receive
--
chrony/chrony.git
--
To unsubscribe email chrony-dev-request@xxxxxxxxxxxxxxxxxxxx with "unsubscribe" in the subject.
For help email chrony-dev-request@xxxxxxxxxxxxxxxxxxxx with "help" in the subject.
Trouble? Email listmaster@xxxxxxxxxxxxxxxxxxxx.