[chrony-dev] [PATCH] MacOS X dynamic drift removal interval

[ Thread Index | Date Index | More chrony.tuxfamily.org/chrony-dev Archives ]


Adjust the drift removal interval based on the observed offset_sd.
A newly calculated interval goes into effect after the current drift removal has completed.
When offset_sd is high, the interval is increased resulting in fewer wakeups to adjust the drift offset.
At lower values of offset_sd the drift removal adjustment interval is pinned to 0.5 seconds.
The predicted error applied at the start of an adjustment is based on the remaining time of the drift removal that is currently in effect.
Predicted adjustment must always be >= 0.0
Default drift removal adjustment interval is 4.0 seconds (was 1.0)
If not synchronised set interval to  maximum of default interval and current interval
---
 sys_macosx.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 61 insertions(+), 7 deletions(-)

diff --git a/sys_macosx.c b/sys_macosx.c
index 5d7c1d5..242feeb 100644
--- a/sys_macosx.c
+++ b/sys_macosx.c
@@ -70,6 +70,21 @@ static double current_freq;
 
 static double adjustment_requested;
 
+/* Interval in seconds between adjustments to cancel systematic drift */
+
+#define DRIFT_REMOVAL_INTERVAL (4.0)
+#define DRIFT_REMOVAL_INTERVAL_MIN (0.5)
+
+static double drift_removal_interval;
+static double current_drift_removal_interval;
+static struct timeval Tdrift;
+
+/* weighting applied to error in calculating drift_removal_interval */
+#define ERROR_WEIGHT (0.5)
+
+/* minimum resolution of current_frequency */
+#define FREQUENCY_RES (1.0e-9)
+
 /* ================================================== */
 
 static void
@@ -80,10 +95,13 @@ clock_initialise(void)
   offset_register = 0.0;
   adjustment_requested = 0.0;
   current_freq = 0.0;
+  drift_removal_interval = DRIFT_REMOVAL_INTERVAL;
+  current_drift_removal_interval = DRIFT_REMOVAL_INTERVAL;
 
   if (gettimeofday(&T0, NULL) < 0) {
     LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
   }
+  Tdrift = T0;
 
   newadj.tv_sec = 0;
   newadj.tv_usec = 0;
@@ -108,7 +126,7 @@ start_adjust(void)
 {
   struct timeval newadj, oldadj;
   struct timeval T1;
-  double elapsed, accrued_error, predicted_error;
+  double elapsed, accrued_error, predicted_error, drift_removal_elapsed;
   double adjust_required;
   double rounding_error;
   double old_adjust_remaining;
@@ -120,7 +138,14 @@ start_adjust(void)
 
   UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
   accrued_error = elapsed * current_freq;
-  predicted_error = DRIFT_REMOVAL_INTERVAL / 2.0 * current_freq;
+
+  UTI_DiffTimevalsToDouble(&drift_removal_elapsed, &T1, &Tdrift);
+  predicted_error = MAX(0.0, (current_drift_removal_interval -  drift_removal_elapsed) / 2.0 * current_freq);
+
+  DEBUG_LOG(LOGF_SysMacOSX, "drift_removal_elapsed: %.3f current_drift_removal_interval: %.3f predicted_error: %.3f",
+                            1.0e6 * drift_removal_elapsed,
+                            1.0e6 * current_drift_removal_interval,
+                            1.0e6 * predicted_error);
 
   adjust_required = - (accrued_error + offset_register + predicted_error);
 
@@ -187,6 +212,27 @@ accrue_offset(double offset, double corr_rate)
 
 /* ================================================== */
 
+/* use est_error to calculate the drift_removal_interval */
+
+static void
+set_sync_status(int synchronised, double est_error, double max_error)
+{
+  double interval;
+
+  if (!synchronised) {
+    drift_removal_interval = MAX(drift_removal_interval, DRIFT_REMOVAL_INTERVAL);
+    return;
+  }
+
+  interval = ERROR_WEIGHT * est_error / (fabs(current_freq) + FREQUENCY_RES);
+  drift_removal_interval = MAX(interval, DRIFT_REMOVAL_INTERVAL_MIN);
+
+  DEBUG_LOG(LOGF_SysMacOSX, "est_error: %.3f current_freq: %.3f est drift_removal_interval: %.3f act drift_removal_interval: %.3f",
+      est_error * 1.0e6, current_freq * 1.0e6, interval, drift_removal_interval);
+}
+
+/* ================================================== */
+
 /* Positive offset means system clock is fast of true time, therefore
    step backwards */
 
@@ -251,8 +297,7 @@ get_offset_correction(struct timeval *raw,
 
 /* ================================================== */
 
-/* Interval in seconds between adjustments to cancel systematic drift */
-#define DRIFT_REMOVAL_INTERVAL (1.0)
+/* Cancel systematic drift */
 
 static int drift_removal_running = 0;
 static SCH_TimeoutID drift_removal_id;
@@ -270,9 +315,18 @@ static SCH_TimeoutID drift_removal_id;
 static void
 drift_removal_timeout(SCH_ArbitraryArgument not_used)
 {
+
   stop_adjust();
+
+  if (gettimeofday(&Tdrift, NULL) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
+  }
+
+  current_drift_removal_interval = drift_removal_interval;
+
   start_adjust();
-  drift_removal_id = SCH_AddTimeoutByDelay(DRIFT_REMOVAL_INTERVAL, drift_removal_timeout, NULL);
+
+  drift_removal_id = SCH_AddTimeoutByDelay(drift_removal_interval, drift_removal_timeout, NULL);
 }
 
 /* ================================================== */
@@ -286,10 +340,10 @@ SYS_MacOSX_Initialise(void)
                             accrue_offset, apply_step_offset,
                             get_offset_correction,
                             NULL /* set_leap */,
-                            NULL /* set_sync_status */);
+                            set_sync_status);
 
 
-  drift_removal_id = SCH_AddTimeoutByDelay(DRIFT_REMOVAL_INTERVAL, drift_removal_timeout, NULL);
+  drift_removal_id = SCH_AddTimeoutByDelay(drift_removal_interval, drift_removal_timeout, NULL);
   drift_removal_running = 1;
 }
 
-- 
2.3.2 (Apple Git-55)


-- 
To unsubscribe email chrony-dev-request@xxxxxxxxxxxxxxxxxxxx with "unsubscribe" in the subject.
For help email chrony-dev-request@xxxxxxxxxxxxxxxxxxxx with "help" in the subject.
Trouble?  Email listmaster@xxxxxxxxxxxxxxxxxxxx.


Mail converted by MHonArc 2.6.19+ http://listengine.tuxfamily.org/