Re: [hatari-devel] Larger mono resolution

[Eero Tamminen <oak@xxxxxxxxxxxxxx>]

Hi,

On perjantai 27 tammikuu 2012, Laurent Sallafranque wrote:
> I don't know what is MagiC,  can you tell me a bit more about it ?
> Where can I find it ?
> Is it just a .prg I can launch and test ?

See:
	http://en.wikipedia.org/wiki/MagiC

A bit like MiNT / MultiTOS, but commercial and also available on PC/Mac.
Quite popular as it was faster than MiNT/MultiTOS combo.

(Better to discuss the actual issues in the separate thread I started.)


	- Eero


> I think the FPU is emulated, but I've never done any test with it ?
> Someone knows a program that use it and should not work without it ?
> 
> Regards
> 
> Laurent
> 
> Le 26/01/2012 22:29, Uwe Seimet a écrit :
> > Hi,
> > 
> >> Ok, I commited the WUXGA screen resolution with 16:10 aspect ratio.
> >> (noticeably higher than Full HD, especially with statusbar)
> > 
> > Thank you, 1920x1200 in TT monochrome work fine.
> > 
> >>>>> My guess is there are problems with the PMMU.
> >>>> 
> >>>> Does't some MagiC version work also on 68000 machines?  If yes,
> >>>> Does that version work with Hatari?
> >>> 
> >>> The last time I tried it did not work. I will try again soon.
> >> 
> >> Please mail the details of what exact issues it has.
> > 
> > The non-68030 MagiC bootloader does not seem to have any effect at all,
> > i.e. MagiC is not booted, but there is no message. With the 68030
> > bootloader I get this message:
> > 
> > PMOVE 00000000,TC PC=00004CF6
> > PMOVE 00000000,TT0 PC=00004CFE
> > PMOVE 00000000,TT1 PC=00004D06
> > M68000 Bus Error reading at address $fffa46.
> > Exception 2 (0) at c9c2 ->  c9c8!
> > M68000 Bus Error reading at address $ff82c0.
> > Exception 2 (0) at ca20 ->  ca3a!
> > M68000 Bus Error writing at address $ff8c14.
> > Exception 2 (0) at a26c ->  8cd8!
> > 
> > Then I get 2 bombs and later some more.
> > 
> > Best regards
> > 
> > Uwe